All Terrain 4x4 Heated Leather Seats New 20" Wheels New 35" Federal Tires Texas on 2040-cars

Auto blog

GMC Sierra AT4X reportedly on the way, nameplate could be GMC's ZR2

In 2016, GM filed an application with Mexico's Institute of Industrial Property to reserve the name AT4X, and in 2019, the automaker made the same request to the U.S. Patent and Trademark Office. Seeing that GMC's current AT4 trim replaces the former All Terrain trim used on the last-gen Sierra pickup, there have been suspicions ever since those trademark filings that GM would use the AT4X name to replace GMC's former All Terrain X trim. GM Authority reports that this is precisely what's going to happen, citing "sources familiar with the matter." The outlet even gleaned an equipment group number: 4SG for AT4X, whereas AT4 is equipment group 4SB.  The surmise is that GMC is again developing its versions of Chevrolet's dirt-clobbering pickups that wear the ZR2 name. Spy shooters caught the GMC Canyon earlier this month trotting around on Multimatic's DSSV dampers and a set of 33-inch tires like its Colorado ZR2 sibling. The Canyon already offers an AT4 trim, it's thought this beefier setup will roll into the lineup as an AT4X.  Stepping up to the half-ton league, at the end of last month Chevy released a teaser for the Silverado ZR2, which had been caught in prototype guise (pictured at top) around Detroit on at least two occasions. We've mused that the production Silverado ZR2 could take some hardcore off-roader cues from the factory-upgraded Silverado ZR2 race truck like a lifted stance, long-travel front suspension, four-leaf springs instead of three-leaf, electronic locking front and rear differentials, and a wider track. One of the production prototypes was caught on 33-inch tires, but we wouldn't be shocked to see 35-inchers on the spec sheet. That size would match the race truck and the rubber fitted to the cross-town rivals Ford Raptor and Ram 1500 TRX. A GMC Sierra AT4X would be the plusher, pricier, chrome-ier version of the ZR2. The aforementioned Multimatic shocks could also be on the docket. We'd expect the GMC Sierra AT4X to bow with the heavily updated 2022 pickup, whenever that arrives. Events around the world of late delayed the pickup, its launch now thought to happen late next year or in early 2023. Related Video:  

2024 GMC Acadia to go big again for third generation

In July, spy shooters caught prototypes of the next-gen GMC Acadia wrapped up tight in camouflage. We couldn't make out any useful aspects but one: The coming third-gen Acadia is larger than the current second-gen. Remember, GMC debuted a smaller Acadia for the 2017 model year, lopping eight inches of length and three inches of width from the first-gen large mid-size SUV to create a smaller mid-size three-row SUV. The new prototypes appeared to show that decision would be reversed, now we have proof thanks to more comments unearthed from GM's recent Investor Day presentations in New York. Caught by GM Authority, automaker president Mark Reuss said, "Alongside the Traverse, we’ll move the GMC Acadia to a little bit different size standpoint. This comes in a little bigger than the old Acadia, so itÂ’s a big transformation for GMC and its part of the market." In a 2016 Automotive News piece about how GMC planned to increase sales volume, AN reported, "One potential avenue: venturing into Jeep's terrain. Industry sources believe GMC is drawing up plans for an SUV based on the same body-on-frame platform that serves as the bones of the GMC Canyon and Chevrolet Colorado midsize pickup. It's in the early stages — it doesn't appear to have been sourced to suppliers yet and the SUV's arrival isn't expected until 2020 or later." The first-gen 2016 GMC Acadia was 200.8 inches long, while a 2016 GMC Canyon Crew Cab with the roughly 5-foot bed was 212.8 inches long. It's thought that truncating the second-gen GMC Acadia to 193.4 inches long and 75.4 inches wide was intended to leave plenty of room for the planned SUV on the Canyon platform. However far that SUV project got, it was reportedly canned in 2018.   Hence an upsized Acadia returns. Reuss' comment about the Chevrolet Traverse could imply what's coming for the GMC, the Chevrolet being 205.9 inches long and 78.6 inches wide. A bigger Acadia could make a better sales proposition against the two-row Terrain, too. The Terrain costs almost $9,000 less than the Acadia and is 182.3 inches long and 72.4 inches wide. It's not clear when GMC plans to show the new Acadia, but the consensus is that it will go on sale for the 2024 model year. Expect an all-new cabin, Super Cruise capability and a front fascia reminiscent of the new Canyon. Powertrain options are a mystery.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: