2024 Gmc Sierra 1500 Elevation on 2040-cars

Auto blog

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video:

Coronavirus shakes up America's truck market: GM outselling Ford and Ram

FCA, Ford and General Motors joined the rest of the U.S. auto industry in taking heavy volume hits due to coronavirus-related shortages of both cars and customers. The saying goes that a rising tide lifts all boats; it stands to reason, then, that a falling one would have the opposite effect.  However, as we learned Thursday, the automotive market can behave in unpredictable ways. While the F-Series remained the best-selling nameplate in Q1, GM's full-size trucks are now outselling Ford's again for the first time in years, and with this upward thrust from the General, FCA's Ram was unceremoniously booted out of a hard-earned second place.  While late-March sales declines hit just about every major automaker in one way or another, the model-by-model results weren't nearly so uniform. And because the market tends to be a zero-sum game, for every winner, there generally has to be a loser.  In this case, that winner was GM, and its rise had to come at the expense of another automaker, in this case, Ford. F-Series sales dropped 13.1 percent in the first quarter of 2020, while sales of GM's full-sized Silverado and Sierra surged nearly 28% in the same period. FCA's Ram lineup managed a steady-as-she-goes 7% increase. All-in, GM finished the quarter with 197,743 full-size trucks sold to Ford's 186,562. Here's the full breakdown: Ford F-Series: 186,562  Chevrolet Silverado*: 144,734 Ram P/U: 128,805 GMC Sierra: 53,009 *includes 1,036 Medium Duty sales Things are a but murkier in the midsize segment, where the Chevy Colorado slipped 36% to just 21,430 units sold — just a few hundred better than the slow-selling Ford Ranger's Q1 numbers. The GMC Canyon experienced an almost identical slide, finishing the quarter with just 4,483 units sold. For perspective, Jeep sold more than 15,000 Gladiators and Toyota's midsize Tacoma slipped less than 8%, finishing the quarter with nearly 54,000 sales.  We suspect this discrepancy in full- and mid-size truck sales comes from shifting incentives. Ford, GM and FCA would like to keep selling bigger trucks because there's far more profit margin built into their list prices. Even with tens of thousands of dollars in manufacturer money on the hood, big trucks still make money.  Since these automakers report quarterly, we won't get another good look at these numbers until July, but if you thought that 2019 represented the new normal for U.S. auto sales, well, think again.