2023 Gmc Sierra 1500 Denali on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

2020 GMC Sierra HD caught in double-cab, low-trim gas-engine guise

Naturally when the 2020 GMC Sierra HD was revealed, GMC picked the flashiest, most-impressive Denali model with the big crew cab configuration and diesel engine. But obviously not all will be equipped that way, so it's exciting to see a lower trim model like the truck above. This 2020 GMC Sierra HD is a more modest SLT trim model equipped with the gas V8 and lacking the MultiPro tailgate. Styling doesn't take a hit with the shorter shape, and arguably, it looks more athletic without so much metal between the wheels. The length is the only real difference, with the rest of the sheetmetal just as chisled on the bigger version. Interestingly, this gas-powered Sierra HD still has a big hood scoop from its diesel sibling. On the current GM heavy duty trucks, only the diesel models get a scoop, and it's specifically for getting more cool air to the intake. The Silverado HD may continue this differentiation, but GMC is clearly keeping it for all models. When the Sierra HD goes on sale this summer, it will be available with either a 6.2-liter gasoline V8 like in this truck, or a 6.6-liter turbodiesel V8 making 445 horsepower and 910 pound-feet of torque, the same as the current model. All models get bedside steps, and the MultiPro tailgate is available either as standard or an option with all trims. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM pauses 3.0-liter turbodiesel production due to a supplier shortage

General Motors confirmed it has temporarily stopped taking orders for trucks and SUVs equipped with the 3.0-liter Duramax turbodiesel six-cylinder engine. It blamed the last-minute pause on a supplier-related shortage. Website TFL Truck first reported the news, and a representative from General Motors quickly confirmed it. The spokesperson explained the issue is due to a "temporary part shortage" and added that production will resume "as soon as possible," meaning the Duramax engine (which is called LM2 internally) is not going away permanently. Additional details are not available, so we don't know if the issue is related to the ongoing chip shortage. Rather than delay deliveries and create a backlog, General Motors is reportedly asking its dealers to encourage buyers who want a turbodiesel engine to instead select either the 5.3-liter V8 or the 6.2-liter V8, depending on the model selected. Both are gasoline-powered units. There's no word yet on when Duramax production will resume. The shortage affects several models, including Chevrolet's Tahoe, Suburban, and Silverado 1500 and GMC's variants of these trucks. Cadillac's Escalade is temporarily diesel-less as well. Heavy Duty variants of the Silverado and the Sierra are not affected because they're powered by a different Duramax engine with eight cylinders. Motorists seeking a full-size SUV powered by an efficient turbodiesel engine are temporarily out of options because the Tahoe/Yukon and the Suburban/Yukon XL had the segment to themselves. The Duramax was surprisingly popular, too: in May 2021, GM Authority reported that the turbodiesel straight-six represented 8% of Suburban sales and 6% of Tahoe sales. Installed in a rear-wheel-drive Tahoe, the engine returns 21 mpg in the city, 28 mpg on the highway, and 24 mpg in a combined cycle, figures that make the body-on-frame behemoth more efficient than the unibody, front-wheel-drive Chevrolet Blazer that's 20 inches shorter and approximately 1,700 pounds lighter. Related video: 2021 Chevrolet Tahoe 3.0L Duramax engine