2021 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

2020 GMC Acadia AT4 priced just a little more than the SLT trim

Cars Direct has seen the order guide pricing the 2020 Acadia AT4 at $42,495 after destination; that means a $41,300 MSRP plus $1,195 for shipping and handling. GMC has left a lot of pricing room between the rugged, all-wheel drive AT4 and the dressed-up, top-shelf Acadia Denali with AWD, the latter costing $49,495, a $7,000 difference. The spread's blown out some by what appears to be an $800 increase for the 2020 Acadia Denali with all-wheel drive. The 2019 model costs $48,695. On the other hand, it looks like the 200 Acadia SLT trim has gone down in price. Cars Direct says that model will run $41,995, which is $300 less than the 2019 version that goes for $42,295 after destination. The new price leaves a $500 gap between the SLT-1 model with all-wheel drive and the AT4 trim, a figure that's a no-brainer to justify for any buyers trying to get a more butch curb appeal.     The Acadia AT4 package comes standard with all-wheel drive and the 3.6-liter V6 with 310 horsepower and 271 pound-feet of torque, puts black chrome on the grille, and nabs a set of exclusive 17-inch wheels on all-terrain tires. The other two engines in the lineup are a new turbocharged 2.0-liter four-cylinder with 230 horsepower and 258 pound-feet of torque, and cylinder deactivation. That motor will be the standard kit on the SLT and Denali trim levels, supplanting the 3.6-liter that's standard on the 2019 models. The entry-level engine carries over, a naturally aspirated 2.5-liter four-cylinder making 193 horsepower and 188 pound-feet of torque.

GM reworking mandatory OnStar plans for some 2024 models

For the 2023 model year, GM added its OnStar and Connected Services plan as standard equipment to a large number of Buick, GMC, and Chevrolet vehicles. Folding the $1,500 retail price into the MSRPs of models like the GMC Acadia and Buick Encore plumped up prices beyond the usual year-on-year bumps. Looks like there's a reversal in play for 2024, GM Authority reporting that many of the models fitted with OnStar and Connected Services — now called OnStar Premium — will step down to three years of OnStar Remote Access standard.   OnStar Remote Access comes with these features: Remote key fob, vehicle locate, and remote personalization through mobile and in-vehicle apps. Three additional features can be added to the plan: OnStar Guardian, in-vehicle hotspot, and Super Cruise. Owners can also upgrade to OnStar Premium if they choose.  Higher trims like Buick's Avenir and GMC's Denali, plus the GMC Hummer and the Cadillac Escalade will retain OnStar Premium as standard equipment. That suite starts with Remote Access and adds: Automatic crash response, stolen vehicle assistance and recovery, OnStar Guardian, in-vehicle app access, unlimited streaming, three years of Super Cruise on vehicles with the hardware, and six months of SiriusXM radio. The Escalade puts a cherry on top with three years Sirius XM instead of six months. The Remote Access plan normally charges $14.99 per month. We're not sure yet if GM will subtract the cost of OnStar Premium from the MSRP and add the $540 for OnStar Remote Access, or if the trial period comes free of charge. Even if that's what happens, the change could take nearly $1,000 off the MSRP of a car like the GMC Acadia before any 2024 increases. We'll know more as the 2024MY models roll out and prices are announced. Related Video 2022 Buick Enclave Avenir revealed