2014 Gmc Sierra Slt All Terrain 4x4 6 Inch Lift on 2040-cars

Auto blog

NHTSA investigates 1.7 million GM SUVs for windshield wiper failures

WASHINGTON - The U.S. National Highway Traffic Safety Administration (NHTSA) said on Tuesday it is investigating whether General Motors should recall an additional 1.7 million sport utility vehicles due to an issue with windshield wiper failures. GM in August 2016 recalled 367,800 2013 GMC Terrain and Chevrolet Equinox SUVs in the United States to address the problem. But after receiving 249 complaints about similar problems, the federal agency said it is probing whether the recall should be expanded to include an additional 1.7 million vehicles from the 2010-2016 model years. The automaker said it is cooperating with the NHTSA review. GM said it recalled the 2013 GMC Terrain and Chevrolet Equinox SUVs "because warranty data showed a higher-than-expected failure rate," adding it has continued to monitor field data on other model years of those vehicles. GM noted that no crashes or injuries related to the issue have been reported. The Detroit-based automaker said the recalls were prompted after a GM Canada brand quality manager reported a potential safety issue relating to reports of windshield wiper failures in Canada through GM's "Speak Up For Safety," program in late 2015. The data showed significantly higher field incidents in parts of Canada, which prompted a June 2016 recall there. Over the next two months, a higher number of U.S. reports prompted a U.S. recall, the company added. In the 2016 recall, GM said the front-wiper module would be replaced with a module that has a water deflector and, if needed, dealers would fill the water management hole and drill a new small hole in a different location.(Reporting by David Shepardson, editing by G Crosse)Related Video: Government/Legal Recalls Chevrolet GM GMC SUV

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Car theft skyrockets thanks to rising parts prices

Cars and trucks today have achieved a high level of average quality, with safety and technology features that keep occupants safer than ever and meet consumers' high expectations. But the National Insurance Crime Bureau finds that those components come with a rising price tag, leading to expensive repair bills — and rising vehicle thefts to support a thriving black market for parts. The nonprofit NICB said it looked at the cost of replacement parts for the top 10 stolen 2016 models, with average OEM part prices pulled from a database of more than 24 million vehicle damage appraisals generated for 2016 and 2017 insurance claims. The list did not include major components like engines or transmissions, only easily-stripped components like bumpers, doors, hoods and headlights. It found that: The 2016 Toyota Camry, which had a used market value of around $15,000, had 15 commonly replaced parts that added up to almost $11,000, not including labor, with quarter panels alone costing almost $1,600 a pair and a set of alloy wheels tallying more than $1,600. The Camry was also the top stolen vehicle in 2016 at 1,113 thefts. A 2016 Nissan Altima had 14 standard parts worth more than $14,000, including a single headlamp assembly that costs just over $1,000. The Altima was the second-top stolen vehicle in 2016 at 1,063 vehicles stolen. And the 2016 GMC Sierra pickup, which was No. 7 on the 2016 top-stolen list, rang up $21,000 from 20 standard components, including an $1,100 headlamp assembly and an $1,100 rear bumper. "For the professional theft ring, stealing and stripping vehicles for parts has always been a lucrative business," Jim Schweitzer, NICB's senior vice president and chief operating officer, said in a statement. "On today's cars and trucks, the parts are often worth more than the intact vehicle and may be easier to move and sell. That's why we see so many thefts of key items like wheels and tires and tailgates ... there's always a market for them." Check out the NICB infographic below. Vehicle thefts in the U.S. rose by more than 4 percent in 2017, based on preliminary FBI data, after rising 7.6 percent in 2016, though the overall trend has been down since vehicle thefts peaked in 1991, according to the NICB. Related Video: Image Credit: National Insurance Crime Bureau Aftermarket GMC Nissan Toyota Auto Repair Insurance Ownership auto parts car values stolen car nicb national insurance crime bureau components