2013 Gmc Sierra Work Truck Regular Cab V6 Only 5k Miles Texas Direct Auto on 2040-cars

Auto blog

GMC Terrain headlight recall fix is a sticker

This GMC Terrain recall over a headlight issue has gone from fascinating to absurd. It started when GMC discovered the headlights on the 2010-2017 Terrain were out of compliance with Federal Motor Vehicle Safety Standards (FMVSS). A pinpoint of low-beam light was being reflected off the high-beam reflector. This bounced a tiny sliver of bright light up into the trees and the sky beside the road, not into oncoming traffic. GMC did the right thing, reporting the noncompliance to the National Highway Traffic Safety Administration. Because the sliver of light was coming from the low beams and was four times brighter than the maximum allowable low beam brightness, the NHTSA told GMC to recall 740,581 units of the SUV. GMC asked for an exemption, admitting the bright spot could cause glare while noting the errant beam didn't affect other road users. The automaker hadn't received any complaints, only a comment from one owner saying the lights put a bright spot in the trees on the other side of the road. The NHTSA denied the request. GMC began notifying owners in April that they'd need to come in for a fix once a fix had been developed. That's the fascinating part. The absurd part, which Tire Meets Road uncovered, is that the fix is a "Headlamp Applique Kit." Which is a piece of frosted tape applied to the outside of the headlight that lets low-beam light through and tamps down any potential glare from the caroming beam. Notice that the parallelogram of frosted tape matches the L-shaped frosted area along the inside of the headlight housing. That portion was already a feature of the lamp, as can be seen in our 2016 Terrain Denali Quick Spin. The repair needs a trip to the dealer for a tech to place a positioning template over the headlight and put the applique kit in the proper spot. GM's instruction kit says the whole thing should take 0.2 of an hour, or 12 minutes—about the time it it would take to get checked into and out of the dealership service department. Owners aren't impressed, some calling the fix unnecessary and ridiculous, and the tape should make it clear that GMC feels the same way. Some owners have said they're going to skip the recall. Those drivers will find that just as GMC couldn't escape the legal ramifications, neither can they. Local motor vehicle bureaus keep track of recall compliance.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Son surprises his dad by restoring his 1949 pickup for Christmas

Norman Meal, an 83-year-old retired farmer from Rushville, IN, nearly missed his big Christmas gift when his son, Kyle, first presented it to him. Norman was oblivious and was looking all over the garage floor until Kyle pointed out a satin black pickup with a bow on it parked inside. This wasn't just another case of a child buying a parent a dream vehicle; the '49 GMC sitting there was Norman's very first truck that was restored and ready to drive. According to Fox 59 WXIN, Norman's father purchased the GMC in 1949, and Norman bought it from him in the mid '50s to use on the farm. However, for about the past 13 years, the truck had been rotting away in the garage of one of Kyle's friends. As a perfect gift to his dad, Kyle took the pickup to a restoration shop to make the old vehicle roadworthy again. Practically everything was replaced – except for the horn. Thankfully, Kyle filmed his dad's reaction to getting the GMC. Check it out and watch them take a drive in the heartwarming video above.