2011 Gmc Sierra 1500 4wd Ext Cab 143.5" Sle on 2040-cars

Auto blog

GMC teases Hummer EV's removable roof panels

Today was supposed to be the day that GM took the wraps off its GMC Hummer EV. We were told as much during the Super Bowl commercial, but GM revised it to an undecided future date, citing the coronavirus as the reason. Instead of the big reveal, we have a teaser.  The Hummer EV is going to feature removable roof panels, and now we get a better look at them. There are four roof panels and a front T-bar that come out of the truck. You can see what that looks like in the video at the top of this post. Comparisons to Jeep are obvious as the open-air experience is likely similar to the Gladiator and Wrangler with their hardtop roof panels removed. That zero-limits slogan makes a bit of sense from this respect. With the sheer number of roof panels, we suspect a single person will be able to remove them alone. In addition to the video of the roof, we get a small peek at the massive digital screens the Hummer will be sporting. Check them out at the bottom of the photo below. They appear to be two large slabs, separate from each other. Other details are scarce on the ground. We’re not sure when the Hummer will make its grand entrance at this point, but are still excited to see the 1,000-horsepower truck hit the road. GMC is still advertising the 0-60 mph time of just 3 seconds, too. The latest tidbit of news suggests that further teasers might be coming, so we could be in for a rather drawn out reveal process. Our senior green editor John Snyder got to see the GMC Hummer in person earlier this year at GMÂ’s EV Day and described it like this: “ItÂ’s a big, off-road-ready pickup complete with giant all-terrain rubber and tow hooks. It features removable roof panels for access to the open sky, which appears to be depicted in the teaser above. It features sail panels behind the C-pillars, similar to those on the Chevy Avalanche and Honda Ridgeline. Its bed was concealed with a tonneau cover, but it sported GMCÂ’s MultiPro tailgate that we first saw on the Sierra Denali. Interior photos showed a spacious interior with blocky shapes, squared hourglass vents that mirror the look of the taillights and a lunar theme that incorporates the topography of the Sea of Tranquility into things like the floor mats and speaker covers. It also has a large infotainment screen as well as a digital instrument panel.” Related video:

2022 GMC Canyon gets a few tiny changes

After overhauling the GMC Canyon lineup into Elevation Standard, Elevation, AT4, and Denali for the 2021 model year, GMC has sprinkled just a few changes on the 2022 Canyon. The midsized pickup's appearance outside and inside doesn't change. The sole alteration in the cabin is that wireless charging won't be come standard on Denali next year, but be an option. That could be GM making lemonade out of lemons, telling customers that if they want hard-to-find semiconductor chips then they're going to have to kick in more dough. The only other change is a new gloss black aluminum spare wheel for the AT4 trim when specced with a Crew Cab and a short bed. This rim replaces the steel spare wheel that remains standard fit on Elevation, Elevation Standard, and Denali. And anyone looking for the High Elevation Package will need to look for it by its new name, the Elevation Premium Package. The Denali Black Edition Package is new for next year for $2,295 on gas-powered models that aren't fitted with the Power Package or the Cat-Back Performance Exhaust. On the exterior, this adds five-inch black assist steps to replace the chrome units, black chrome exhaust tips instead of polished tips, and 20-inch low-gloss-black aluminum wheels with black GMC logo center caps. Inside come premium all-weather floor mats taking the place of the carpeted mats. The current, second-generation Canyon doesn't have long to live, with the third-generation pickup expected for the 2023 or 2024 model year. Spy shots from earlier this year make us think the Canyon and its Chevrolet Colorado twin will pick up styling to emphasize their connection to GM's larger half-ton pickups. Rumor also has it that the Silverado will donate what may be the new midsizer's only powertrain, a turbocharged four-cylinder engine — the new corporate 2.7-liter turbo in this instance. That 310-horsepower mill would supplant both the 2.5-liter four-cylinder 3.6-liter V6 gas engines now available, and the 2.8-liter Duramax diesel. It does, however, appear that GMC will get its own version of the Colorado ZR2, spy shooters catching a camouflaged, high-rise Canyon on a set of Multimatic DSSV dampers. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.