2010 Gmc Sierra 1500 Sle on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GMC rules out subcompact crossover to go premium, focus on trucks

Don't wait for GMC's on-again, off-again baby crossover any longer. The company confirmed it has no plans to enter the growing car-based subcompact crossover segment in the near future because the expansion wouldn't fit its image. "I'm going to give you a definitive no on that one," answered Mark Alger, a regional marketing manager for GMC's Canadian division, when asked about the entry-level segment by GM Authority. "We want to position GMC as a premium brand, focus on our trucks, and capitalize on the AT4 name," he added. Positioning GMC as a premium brand wouldn't prevent officials from giving an entry-level the green light; Audi, BMW, and Mercedes-Benz all sell cars priced in the vicinity of $30,000. Focusing on trucks like the Sierra and the Canyon makes sense, however, because they compete in a bigger segment of the market where profit margins are much wider. It helps that GMC doesn't have to worry about markets outside of North America; it's not concerned about its sales and image in, say, Spain. We've heard speculation about GMC's entry-level model since the Granite concept (pictured above) made its debut during the 2010 Detroit auto show. It was approved for production in 2010, approved again the following year (complete with rear suicide doors), and canceled in 2012, but the reports never went away. The segment's popularity added credibility to the recent murmurs describing a born-again Granite aimed at the Honda HR-V and the Toyota C-HR, among others. The Chevy Trax and Buick Encore are both GM vehicles that compete in this segment.  GMC also canceled a body-on-frame, Bronco-taming SUV, according to a recent report. The truck-focused automaker promised every nameplate in its range will receive the rugged AT4 treatment by 2021, however, and it announced plans to show the off-road-ready Canyon in early 2020.

GM recalling 316k vehicles due to headlamp faults

General Motors has announced a recall covering 316,357 vehicles globally, due to the possibility of sporadic or permanent failure of the low-beam headlamps. 273,182 of these vehicles are in the United States, while the remaining affected units are in Canada, Mexico, and elsewhere. This recall includes the 2006-09 Buick LaCrosse (pictured above), 2006-07 Chevy TrailBlazer and TrailBlazer EXT, 2006-07 GMC Envoy and 2006 GMC Envoy XL, 2006-07 Buick Rainier, 2006-08 Saab 9-7X, and 2006-08 Isuzu Ascender. In an email sent to Autoblog, General Motors explains that if the headlamp driver modules are not functioning correctly, "the low-beam headlamps and daytime running lamps could intermittently or permanently fail to illuminate." GM states that this problem does not affect things like high-beams, turn signals, marker lamps, or foglamps. As of this writing, GM states it "has not been able to confirm whether the HDMs in these vehicles caused any vehicle accidents." The National Highway Traffic Safety Administration has been notified, but the recall has not yet posted to the government agency's website. Scroll down to read the full details in GM's email. General Motors is recalling 273,182 Buick LaCrosse sedans and Chevrolet, GMC, Buick, Saab and Isuzu midsize SUVs in the U.S. for possible intermittent or permanent loss of low beam headlamps. Affected models are: 2006-2009 Buick LaCrosse sedans; 2006-2007 Chevrolet TrailBlazer and 2006 TrailBlazer EXT; 2006-2007 GMC Envoy and 2006 Envoy XL; 2006-2007 Buick Rainier; 2006-2008 Saab 9-7X and 2006-2008 Isuzu Ascender midsize SUVs. If the headlamp driver modules is not operating correctly, the low-beam headlamps and daytime running lamps could intermittently or permanently fail to illuminate. This condition does not affect the high-beam headlamps, marker lamps, turn signals, or fog lamps. GM has not been able to confirm whether the HDMs in these vehicles caused any vehicle accidents. The total population, including the U.S., Canada, Mexico and exports from North America is 316,357. The NHTSA was sent the Part 573 information for this recall on November 25. It has not yet posted to the NHTSA website. Featured Gallery 2008 Buick LaCrosse CXS News Source: General Motors Recalls Buick Chevrolet GM GMC Isuzu Saab SUV Sedan chevy trailblazer buick rainier isuzu ascender