2007 Gmc Sierra Denali Crew Cab Pickup 4-door 6.2l on 2040-cars

Auto blog

2024 GMC Sierra 1500 AT4X makes Duramax diesel standard

Changes are afoot for the 2024 GMC Sierra 1500 lineup. The one ringing the biggest bells for the off-roading crowd is the engine swap headed to the AT4X trim. Right now, if you want an AT4X you've got Hobson's choice of engines: The 6.2-liter EcoTec V8 with 420 horsepower and 460 pound-feet of torque. Next year, the 3.0-liter Duramax turbodiesel inline-six that's standard equipment on the AT4 and Denali Ultimate trims becomes the standard engine on the AT4X. The oil-burner makes 305 hp and 495 lb-ft., sent through the same ten-speed automatic the 6.2 V8 is yoked to. GM said around 20% of buyers have checked the Duramax box when buying a Sierra 1500 since the automaker released the upgraded engine for the 2023 model year — it's also offered on the SLE, Elevation, SLT, and Denali trims. The percentage should grow thanks to the diesel's low-speed grunt being one of the best "force multipliers" when traipsing over and through particularly challenging corners of the woods. The 6.2-liter will take the exhaust note crown over the diesel after the introduction of an active exhaust system with a Sport mode exclusively for the 6.2. Assuming no more changes to engine lineups before the 2024 Sierra arrives, the SLT, AT4, Denali, Denali Ultimate, and AT4X will have access to the active exhaust option.   GM Authority says the Duramax is getting another maximal friend in 2024, too. The 2.7-liter Turbo High-Output four-cylinder makes 310 hp and 430 lb-ft and is standard equipment on the entry-level Pro trim. the SLE, and Elevation trims will be renamed "TurboMax," which sounds like an Autobot, and that's not a bad thing. GM applied to trademark the name in January. The new moniker is headed to the Chevrolet Silverado as well, and we'd bet on exterior badging to let the world know.  Elsewhere around the Sierra, there will be two new exterior colors, Downpour Metallic and Thunderstorm Gray, mixable and matchable with two new aluminum wheel designs. And between those wheels, power retractable steps will be available for the Denali, Denali Ultimate, AT4 and AT4X trims. We'll be waiting to see how the steps differ from the GMC MultiPro Power Steps available now for $1,195.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM will recall 3.5 million pickups and SUVs to fix brake issue

WASHINGTON — General Motors Co is recalling 3.46 million U.S. pickup trucks and SUVs to address a vacuum pump issue that could make braking more difficult and increase the risk of a crash. The recall, which covers 2014-2018 model year vehicles, including some Cadillac Escalade, Chevrolet Silverado, Chevrolet Tahoe, GMC Sierra, Chevrolet Suburban and GMC Yukon vehicles, was triggered because the amount of vacuum created by the vacuum pump may decrease over time, GM told the National Highway Traffic Safety Administration (NHTSA) in documents posted Wednesday. NHTSA opened a preliminary investigation into the issue in November 2018, and said it had reports of 9 crashes and two injuries related to the issue. It provided GM in July with additional field reports that prompted the automaker to open an investigation. The company did not immediately say on Wednesday how many injuries or crashes are linked to the issue but said it could impact braking in "rare circumstances." GM said dealers will reprogram the Electronic Brake Control Module with a new calibration that will improve how the system utilizes the hydraulic brake boost assist function when vacuum assist is depleted. GM said the vacuum assist pump, which is lubricated with engine oil that flows into the pump through a filter screen, can in some cases lose effectiveness over time, as debris such as oil sludge can accumulate on the filter screen. GM told NHTSA that prior model years used a different brake assist system design, and vehicles manufactured after 2018 were not equipped with the affected pump design. Recalls Chevrolet GM GMC

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.