2006 Gmc Sierra 1500 on 2040-cars

Auto blog

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

2022 GMC Sierra spotted with minimal camouflage

By all accounts, GM's current full-size truck twins, the Chevrolet Silverado and GMC Sierra, are good trucks that are in many ways competitive with the sales-leading Ford F-150 and a fresh Ram 1500 that's regularly nipping at the Bowtied truck's tailgate. Considering the cashflow generated by the segment, though, it's no surprise to see a refreshed version of the GMC Sierra testing with some light camouflage hiding some of the upgraded bits and pieces. We'll get to what we can see in just a moment, but first we'll point out what we can't see in these spy shots. What the GM pair really needs is a competitive interior. The current Silverado and Sierra are bridled by dashboards, door panels and instrument clusters that simply aren't good enough when compared to their Ram and Ford competitors. We've spoken with a few designers from GM, and they are well aware of the criticisms that have been levied at their full-size truck duo, so we'd be shocked if there wasn't a heavily revised interior lurking for the trucks' next refresh. Hopefully a future set of spy photos will give us a better look at what's inside, because from this far-away, through-the-windshield look doesn't give us much information. Will the Sierra share an interior with the redesigned Yukon? We'll just have to wait and see, but suffice it to say that any improvement will be welcome. Moving to the exterior, we can clearly see that the blocky, angular look of the current Sierra will continue through this refresh. A tiny look through the heavy tarp covering the truck's face reveals a black plastic mesh grille, but we're sure there's plenty of chrome hiding under there, too. We're left to wonder if that opening allows for a camera or radar to peek through, but rumors suggest GM's well-regarded Super Cruise could be on the menu within the next few years. We have no idea what's under this test truck's hood, but we wouldn't imagine there will be much change to the current truck's solid list of powertrain options. Here's hoping the 3.0-liter Duramax inline-six diesel engine gets the cooling it needs to raise its tow rating to match its class-leading efficiency, because it's arguably otherwise the best light-duty diesel offering in America. We know the automaker is working on electric powertrains, too, but we expect to see those debut first in the Hummer-branded truck that will be sold in GMC dealerships.

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.