1985 Gmc Jimmy on 2040-cars

Auto blog

GM reportedly recalling select 2014 Silverado, Sierra pickups over airbag issue

General Motors is recalling 843 2014 Chevrolet Silverado and GMC Sierra Crew Cab pickups, due to a fault with the vehicle's airbags. According to GM, the airbags may not inflate properly in the event of a crash. There haven't been any crashes or injuries associated with this recall, which is always good. Naturally, repairs will be free of charge, and GM will begin contacting affected owners soon.
GM has a lot hanging on the 2014 Chevrolet Silverado and GMC Sierra. Not only is it banking over $12,000 per vehicle on these trucks, as reported by Automotive News, but GM is counting on the Sierra and Silverado to take the fight to cross-town rivals Ford and Ram. The F-150 and Ram 1500 have been on a tear over the past few years, with fresh updates, advanced powertrains, and plenty of solid press while the GM trucks have been waiting for the 2014-model-year upgrades.
It's still entirely too early to judge the Sierra and Silverado, particularly as those 843 recalled trucks make up barely two percent of the over 40,000 units moved so far. But, as AN rightly states, these trucks are the most important vehicles to come out of GM since bankruptcy, with about 60 percent of global profits relating to pickups and SUVs. Starting an introduction of such a big product with a recall, however small, is not the preferred way to do things.

2023 J.D. Power Initial Quality Study shows there's less quality than last year

Vehicle inventory, vehicle pricing, and the supply chain are finally showing improvement. Vehicle quality, on the other hand, is still going the wrong way. That's the takeaway from the 2023 J.D. Power Initial Quality Study that found overall problems exceeded last year's record high. The study surveyed owners of 2022-model-year vehicles to assess the average rate of problems per 100 vehicles (PP100) during the first 90 days of ownership. The average figure for the 32 ranked manufacturers in 2020 was about 166 problems per 100 vehicles. In the 2021 IQS, that dropped to an average of 162. For 2022, the average jumped to 180 problems. For 2023, the PP100 is up to an industry average of 192 — an increase of 30 problems per 100 vehicles in just two years. Let's get to the good news first: Dodge reclaimed the crown of having the lowest number of problems per 100 vehicles at 140. Buick won last year with 139 PP100, falling to third this year. Dodge was the first American automaker to top the IQS in 2021. Its return as the least problematic gives parent company Stellantis three wins in four years after Ram was crowned in 2021. It also gives U.S. brands a four-peat after Buick topped the chart in 2022 by having owners report the fewest problems. This year's top 10 is Dodge, Ram, Alfa Romeo, Buick, Chevrolet, GMC, Porsche, Cadillac, Kia, and Lexus. Stellantis gathered a few feathers for its cap, in fact. Maserati showed the largest improvement year-on-year, followed by Alfa Romeo, and Alfa Romeo posted the lowest PP100 among the premium class, beating Porsche and Cadillac. Alfa Romeo has been vocal about working to improve quality, mentioning Lexus as a target. Last year the Japanese brand finished sixth, the Italians finished near the bottom, between Jaguar and Mitsubishi. This year Alfa jumped to third, Lexus dropped to tenth. Ram was the third-best on the list of improvers from 2022 to 2023.   The individual model with the lowest PP100 is the Nissan Maxima. Now for the troublesome bits. In the words of Frank Hanley, senior director of auto benchmarking at J.D. Power, "The industry is at a major crossroad and the path each manufacturer chooses is paramount for its future.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.