2008 Gmc Envoy Sle-1 4wd on 2040-cars

Auto blog

2023 GMC Canyon debuts August 11

Chevrolet started GM's new-generation midsize truck party with the 2023 Colorado, now GMC's about to hit the stage with the 2023 Canyon. On August 11 at 11 a.m. Eastern time, we'll see what the new generation has done for the Colorado's upscale sibling. GMC teased us with a low angle of the coming Canyon in AT4X trim April. That revealed brawnier bits like big Goodyear Wrangler tires wrapped around 17-inch beadlock-capable wheels, plastic wheel arch flares, and rock rails. The initial version of that trim will be called the AT4X with Edition 1 Package, the front view showing split headlights, a new grille, thin LEDs, and a brush bar like the unit sprouting from nose of the Colorado ZR2 Desert Boss. We're also told there will be a "higher and wider stance, which is factory lifted." The current AT4 trim gets raised one inch, and we have a feeling the AT4X will get around three inches on its tippy toes just like the Colorado ZR2. The rationalization of body styles into a single Crew Cab Short Box will make ease configurations and production. Sadly, the 2.8-liter Duramax four-cylinder diesel is all but certain to be a goner here as well. The 2.7-liter four-cylinder gas engine should slip in here as the sole engine choice in two or three outputs. There's no telling which trims will get which outputs standard, but the choices are a base tune with 237 horsepower and 259 pound-feet of torque, a middle turbocharged tune with 310 hp and 390 lb-ft, and a high-output turboed topper with 310 hp and 430 lb-ft.   The 2023 GMC Canyon AT4X with Edition 1 Package will be available to order on the same day the lineup is revealed, at which time we expect to find out what's included in the Edition 1 versions compared to the AT4X variant that will join the lineup for series production. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

General Motors reportedly considering small electric pickup

General Motors is considering adding a small entry-level model to its range of electric pickups, according to a recent report. The carmaker is currently showing a prototype to a select group of customers to gather feedback about the model before executives decide its fate. Industry trade journal Automotive News claims that it saw the pickup during a workshop organized by General Motors and describes it as being "smaller than the Ford Maverick and the Hyundai Santa Cruz." For context, the Maverick stretches about 200 inches long, 73 inches wide, and 69 inches tall, so it's around 12 inches shorter, 11 inches narrower, and 10 inches lower than the recently-unveiled Chevrolet Colorado. It sounds like this little GM truck would be closer in size to the Brazilian-market Chevy Montana, pictured at top. But unlike the Montana, the model that Automotive News got a look at had two doors, a "low roofline," a four- to four-and-a-half-foot cargo box, and a design described as futuristic and sporty. If launched, the yet-unnamed pickup would be marketed as an "affordable" EV with a base price pegged under $30,000. However, that's a big if: the pickup — whose name hasn't been announced — hasn't been approved for production. "We're creating these to get a reaction and then to try to modify it or move on," Michael Pevovar, the director affordable EV and crossover design for Chevrolet, told the publication. "The input may come back that it's just too small, and that's okay," he added. If it turns out to be too small for buyers, General Motors hasn't ruled out building its entry-level electric pickup on a different architecture to make it a little bigger. It's too early to tell where the electric pickup would slot in the General Motors portfolio if executives approve it. Chevrolet immediately comes to mind, especially considering the sub-$30,000 price point. The model would make more sense with a bowtie on its front end than with a Cadillac emblem, GMC's trucks are normally positioned higher than Chevrolet's, and Buick hasn't built a pickup in many decades. Similarly, there's no word on when it would enter production or where it would be built. With that being said, there's very clearly a market for affordable, small pickup trucks. As of the third quarter of last year, Ford had sold more Mavericks than it had the Expedition or the Ranger. Hyundai hasn't sold as many Santa Cruz trucks, but it's still not too shabby, having beaten out the Venue and Accent last year.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: