2011 Gmc Canyon Sle on 2040-cars

Auto blog

GMC Syclone spools up a storm on Jay Leno's Garage

A storm was brewing on American roads in the early 1990s. That's when Detroit's automakers were producing some of the hottest performance trucks ever devised – models like the Ford Lightning, GMC Typhoon, and its flyweight pickup sibling, the GMC Syclone. Jay Leno just happens to have one of the latter in his garage, and took it out to showcase in this latest video segment. The Syclone was an exercise in absurdity, and could not only trounce any other pickup on the road, it could outrun anything else GM made and just about anything else on the road – beating Ferraris and Porsches off the line. In a pickup, for crying out loud. The kicker is that its engine wasn't such a monster, either: under the hood sat a 4.3-liter turbocharged V6 pumping out what would seem by today's standards to be an adequate 280 horsepower and 350 pound-feet of torque. Even the smaller of the EcoBoost V6s available in today's Ford F-150 produces more than that. But in a lightweight, compact pickup, those figures were enough to propel the Syclone to 60 in 4.3 seconds and run the quarter-mile in 13.6 seconds. Long before the dune-jumping Ford F-150 SVT Raptor or even the Viper-powered Dodge Ram SRT-10, GM made fewer than 3,000 Syclones based on the compact Sonoma (sister to the Chevy S-10) and another 4,700 of the Typhoon, which was mechanically similar but more practical (albeit heavier) wagon bodywork from the Jimmy. But as Jay aptly points out, the Syclone was the one you wanted. Scope it out in the ten-minute video clip above.

2019 GMC Sierra Denali and its nifty tailgate roll into dealers

We've got more details about the 2019 GMC Sierra Denali now that it's rolling into dealerships, starting with its floor price of $56,195, including destination fee, for the rear-wheel-drive models. That's a jump of $1,900 over the previous generation of its premium full-size pickup. Four-wheel-drive models start at $60,295. The crew-cab truck has grown in every dimension as well, adding about 4 inches to the wheelbase, nearly 2 inches in length and 1.2 inches in width. There's also nearly 3 inches more rear legroom. Bed options are 5-foot-8 or 6-foot-6. There are three engine options. Two are carryovers from 2018: a 5.3-liter V8 that sends 355 horsepower and 383 pound-feet of torque through an eight-speed automatic transmission, and an available 6.2-liter V8 that makes 420 hp and 460 lb-ft of torque and mated to a 10-speed automatic. Both come with GM's dynamic fuel management cylinder-deactivation technology to optimize power and fuel efficiency. A new 3.0-liter turbodiesel paired with a 10-speed automatic is expected in early 2019. The EPA hasn't yet released official fuel economy ratings, but GM estimates them at 17 miles per gallon in the city and 23 mpg on the highway for the two-wheel-drive versions, and 15/21 in four-wheel drive. The truck gets adaptive ride control which can adjust the dampers every 2 milliseconds based on real-time monitoring of the road and driver inputs for improved ride and handling. A new traction select system adjusts the transmission shift points, throttle mapping and StabiliTrak to tailor performance to different terrain or weather conditions. Inside the crew cab, there's new Forge leather-appointed seats, open-pore wood trim and dark finished aluminum decor, plus an 8-inch-diagonal HD color touchscreen with embedded navigation and Apple CarPlay and Android Auto compatibility. Most of the other new stuff we've covered before, including new C-shaped LED headlights and LED tail and fog lamps, optional 22-inch wheels, full-color head-up display, trailer-hitch assist apps and cameras, and rear-camera mirror. The truck also loses up to 360 pounds from the outgoing model via a scratch- and dent-resistant carbon-fiber bed box that replaces steel, and use of aluminum in the doors, hood and tailgate.

GM renders new Chevy Colorado, GMC Canyon pickups

At a series of industry seminars in Traverse City, MI today, General Motors executive vice president Dan Ammann gifted us with our first glimpse of the upcoming midsize pickup range from Chevrolet and GMC.
Just two slivers of nose are all we can see of the soon-to-be announced Chevy Colorado and GMC Canyon, though the teaser image does make plain that the pair will follow the styling cues (at least up front) found on big brothers Silverado and Sierra.
GM hasn't given us much in the way of detail in its ultra-brief press release that accompanied the teaser image, which is to be expected. We're told only that the pair of trucks are designed to be "capable, versatile and fuel-efficient alternatives to full-size pickups" and that production will start sometime in 2014, at the Wentzville, MO assembly center.