2006 Gmc Canyon Sle 4x4 Truck 3.5l Cd Heavy-duty Suspension Package on 2040-cars

Auto blog

Torque time | 2017 GMC Sierra HD First Drive

It's not the truck that counts, it's how you use it. It's the heavy stuff you fit in its bed or the extremely heavy stuff that gets hooked up to the tow hitch. The ATV, the Jet Skis, the trailer with more square footage than a Greenwich Village apartment. Perhaps you need to get Seabiscuit or, uh, Mr. Ed to wherever they need to gallop next. In our case, there's a pair of very serious-looking snowmobiles perched atop the bed of a GMC Sierra. They spread out as wide as the extended tow mirrors, and their back halves are dangling precariously beyond the truck. Sterling Archer would be giddy; I'm a little nervous. But only because canyon roads and wide vehicles with a high center of gravity go together like peas and custard. The added weight is no sweat at all. That's because this is the 2017 GMC Sierra HD Denali, a truck with the sort of enhanced power, torque, suspension, and stopping capability expected of a heavy-duty pickup. And for this year, the power and torque get a serious bump courtesy of a new 6.6-liter Duramax turbodiesel engine reengineered from almost the ground up with 90 percent new parts. It's quieter and more efficient and it emits less, while most importantly producing 445 horsepower and 910 pound-feet of torque. That's up from 397 and 765, respectively. Chevy fans will note that the same engine is also available in the updated 2017 Silverado HD. Now, for those keeping score at home, that horsepower is best-in-class but the torque number still falls short of the new Ford Super Duty and its Power Stroke diesel V8's 925 lb-ft. Aw shucks. For the record, GM's engineers didn't seem too concerned that they weren't able to eke out an extra 16 torques just to say they're No. 1. "We wanted to first meet emissions and then deliver the maximum horsepower and torque we could, and deliver it over the widest usability range possible," said chief engineer Eric Stanczak. And let's be honest here, 910 pound-feet is herculean, and once again, a jump of 145 lb-ft. Or one Subaru Impreza's worth. Or 110 more than the best Ram can do on a 2500, and its Cummins turbodiesel's 800 pound-feet was eye-popping not too long ago. (The Ram 3500 maxes out at 900 lb-ft with the right transmission.) Ah, but here's the rub. That Cummins-equipped Ram 2500 can still tow more weight according to SAE-compliant measurements – 17,510 pounds for a Ram crew cab with a short bed versus 13,000 in the similar Sierra 2500. The Ford F-250 can manage 15,000.

Diesel details: Comparing Ram 1500 EcoDiesel, Chevy Silverado Duramax, Ford F-150 Powerstroke

With specifications for the 2019 Ford F-150 Power Stroke diesel already out, and the details on the 2020 Ram 1500 EcoDiesel and Chevy Silverado Duramax (and its GMC Sierra twin) trickling out, we felt it was a good time to start comparing the full-size trucks' light-duty diesels. Bear in mind, we've only driven one of these new diesel trucks, so we'll be sticking to numbers for now. Some numbers haven't been announced yet, either, but stay tuned, because we'll be updating this post with additional specifications as they become available. And if you want to compare any other versions of these trucks with other vehicles, be sure to check out our comparison tool. Now let's start comparing, starting with our big chart of numbers below. As we can plainly see, these trucks are quite closely matched. Each one has six cylinders, a displacement of 3.0 liters and a turbocharger to boost it. The output of each is somewhat close, too. The Ram 1500 EcoDiesel is the torque king at 480 pound-feet, 20 more than the GM trucks and 40 more than the Ford. The GM trucks win on power, though, with 277 ponies, 17 more than the Ram, and 27 more than the Ford. GM does report that you get their trucks' peak 460 pound-feet of torque from 1,500 rpm to 3,000 rpm, whereas the others only report peak torque at a particular point in the rev band, but all of these trucks should have wide, flat torque curves as you would expect from modern turbodiesels. 2020 Ram 1500 EcoDiesel View 8 Photos Engine output is only one part of the truck performance equation. We also have towing and payload capacity, as well as fuel economy. With towing, the Ram 1500 is the current leader with a maximum capacity of 12,560 pounds. That tops the Ford F-150's 11,400-pound tow rating by well over 1,000 pounds. The F-150 can carry 2,020 pounds in its bed, but we don't know yet whether that's better or worse than the Ram or the GM trucks. We also don't have numbers for the GM trucks' towing capacities. View 9 Photos As for fuel economy, the Ford F-150 manages a thoroughly impressive 22 mpg in the city and 30 on the highway with two-wheel drive. Choosing four-wheel drive drops those numbers to 20 and 25 respectively. The fuel economy numbers for the Ram, Chevy and GMC haven't been revealed yet, but for some comparison, we can look at the old Ram EcoDiesel. That truck's best fuel economy was 20 in the city and 27 on the highway with two-wheel drive.

Junkyard Gem: 1990 GMC S-15 Jimmy 4x4

The General sold the GMC-badged version of the first-generation Chevy S-10 Blazer, known as the S-15 Jimmy or just the Jimmy, from the 1982 through 1994 model years. These trucks were based on the small S-10 pickup and sold well (until small trucks were forced to get bigger and less truck-like after the dawn of the Ford Explorer-inspired commuter-truck era), but they have become difficult to find in vehicle graveyards in our current century. Here's a '90 Jimmy 4x4 with red-primer paint job, found in a self-service yard on California's Central Coast last month. GMC shoppers could get the 1990 Jimmy as a rear-wheel-drive truck, but this one has the four-wheel-drive option that allowed Tahoe-bound skiers to skip the chain monkeys on the way to the slopes (the CHP, understanding that California drivers have a 95% mortality rate on snow or ice, requires chains or four-wheel-drive to get over Donner Pass when there's a hint of snow forecast). GM sold so many millions of small-block Chevrolet V8s that it made economic sense to use the same tooling to produce a V6 version. The result was this truck's 4.3-liter V6 that was three-quarters of the good old Chevy 350 (5.7-liter) V8 that powered so many Camaros, Chevelles and Impalas. The 4.3 didn't make smooth power, but it got the job done and held together quite well. This one was rated at 160 horsepower, good enough for the Jimmy 4x4's 3,512-pound curb weight. These days, though, used-truck shoppers insist on at least two tons of heft plus four doors. Some discount lot in Monterey or Salinas couldn't even get $999 for this truck, and so it ended up in the final stop before the cold steel jaws of the crusher. 1990 was the last model year for the two-door-only Jimmy; for 1991, the Jimmy came with a choice of two doors (for devil-may-care types) or four doors (for drop-the-kids-at-school types). I've always liked the look of the instrument panels on the early S-10s and its siblings; even though the designers had to work within strict budgetary limitations, they made the panels look interesting. This truck nearly made it to 170,000 miles before the end. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So powerful with the 4.3 (the regular S-15 pickup still came with a 2.8-liter V6 as base equipment) that it could destroy a TV camera.