2014 Gmc Acadia Denali on 2040-cars

Auto blog

2019 GMC Sierra 1500 pickup teased on Twitter

GM's half-ton pickup line will be fully rounded up later this week when the new GMC Sierra 1500 is revealed. Though the unveiling is on March 1, GMC has provided a teaser of the new truck ahead of time on Twitter. It shows only the front fascia, but considering the Sierra's history of simply being a badge-engineered Silverado, it's arguably the most important angle of the truck. The teaser confirms a few things we were expecting based on past spy shots. The headlights look much more conventional than the Silverado's rather small units. The Sierra's grille, unlike the Silverado's, will also rise above the tops of the headlights, providing more of a big-rig appearance. We also finally get to see the GMC badge on the front of the Sierra, and it looks like it's an enormous rendition. As for the rest of the truck, previous spy shots have shown the Sierra will have other subtle styling changes from the Silverado. The wheel wells are shaped differently, and the taillights will be unique to the GMC. The interior of the new Sierra will look almost identical to that of the Silverado, with the exception of a few minor trim details. We also expect the Sierra to use the same engine lineup as the Chevy's, which at this point we know will consist of a 3.0-liter turbocharged diesel inline-six, and naturally aspirated 5.3- and 6.2-liter V8s. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GMC Hummer EV First Drive Review | True supertruck, for better and for worse

Right from the start, the 2022 GMC Hummer EV has been advertised with superlatives, mostly in reference to its specifications. GMC has even called it a "supertruck" in its own materials. And while we've received a taste of the truck before, only now have we finally got our hands on the production-spec model, and had the opportunity to drive it both off-road and on the street. What we've found is that the Hummer EV is undoubtedly a supertruck, much the same way that a Ferrari or a Lamborghini is a supercar. It totally delivers on its incredible capabilities, but there are compromises. And they're worth being aware of before plunking down the more than $100,000 a first-year Hummer will run you. That six-figure truck is the version we tested, the Edition 1, which actually rings in at $112,595. It's the only version in production for now, with lower trims coming in the next couple years. It's sold out, but many of the features will be available on the next highest trim level, the EV 3X. Among those features are the three motors, torque vectoring, “Watts To Freedom” launch mode, four-wheel steering, removable glass roof panels, 35-inch tires, Super Cruise, power rear window and MultiPro tailgate. In other words, although you can literally no longer order an Edition 1, you can still order a Hummer EV with nearly the same specification. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. We'll start where most owners probably will: mashing the throttle. No one can resist seeing what 1,000 horsepower and 1,200 pound-feet of torque will feel like. It's even a tad more torque in Watts To Freedom mode, which preemptively runs the cooling system to enable the additional twist. That mode allows the Hummer to hit 60 mph in 3 seconds, and the drama is dialed up with visual, audible and haptic cues. But even without engaging launch mode, the Hummer EV impresses and delights with its acceleration. In addition to pinning you to the seat, the entire truck squats in an exaggerated fashion. It's absurd, especially considering the truck's curb weight that surpasses a truly astounding 9,000 pounds. ThatÂ’s several hundred pounds more than the heaviest GMC Sierra HD 3500 diesel dually. Of course, that weight, as well as the nature of electric motors, means the party starts to calm down as the speed increases. The weight is noticeable in other areas, too.

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.