2012 Heated Leather, Sunroofs, Back Up Camera, Parking Sensors, Tint, Tow Hitch on 2040-cars

Auto blog

GM is training more first responders for EV emergencies in the U.S. and Canada

GM is training more first responders to be able to handle emergencies involving electric vehicles. The automaker is "significantly expanding" its EV First Responder Training program in the United States and Canada as electric vehicle sales continue to grow. Its initiative will primarily focus on training firefighters and equipping them with the necessary knowledge about full electric vehicle technologies. GM says it's hoping to dispel misconceptions when it comes to handling EVs in emergency situations. One of those misconceptions is that water is dangerous around EV batteries — turns out the recommended way to put out lithium-ion battery fires is by using copious amounts of water.  Andrew Klock, a senior manager of education and development at the National Fire Protection Association (NFPA), said: "The best way for the public and private vehicle fleet owners to rapidly adopt EVs is to train firefighters and emergency responders on how to handle incidents involving battery powered vehicles. The fire service has had more than 100 years to gain the knowledge needed to respond to internal combustion engine fires, and it is critical that they are now educated on EV safety." The NFPA held trainings of its own that had benefited 300,000 first responders, but it believes more than 800,000 members of the community still need further training.   GM previously piloted the program in southeast Michigan, but now it's conducting training events across Michigan and in Fort Worth, Texas, as well. Later this summer, it's bringing the program to metro New York City and Southern California. Participants will have to attend four-hour sessions, with up to two per day, held in various venues, such as fire houses and dealerships. Interested first and second responders can register through the program's dedicated website and earn a certificate from the Illinois Fire Service Institute if they score higher than 70 percent on the learning assessment by the end of their training.  The automaker already has a few EV models on the market, including the Chevy Bolts, the GMC Hummer EV and the Cadillac Lyriq. It has huge electrification plans for the future, though, and training responders could help make potential customers more receptive to the idea of switching to electric vehicles. GM aims to launch 30 EV models by 2025 and to exclusively sell EVs ten years after that. Related video: Green Cadillac Chevrolet GM GMC Safety Electric

GMC to get own model not shared with Chevy?

For years, GMC has existed as a brand without a single unique product, reconstituting Chevrolet trucks, SUVs and crossovers with more frosting in exchange for a few extra dollars. The Sierra is a Silverado, the Acadia a Traverse, and the Terrain an Equinox, although admittedly the latter pair are visually differentiated to a significant degree.
GMC could be set to expand beyond its Chevy-based roots, though. During last week's Detroit Auto Show press days, GM's product boss Mark Reuss was asked whether there'd ever be a GMC that wasn't taken from Chevy. "Oh, yes, you will," Reuss told the media. "The health of GMC is astonishingly good from a consideration standpoint." Reuss wouldn't elaborate on what the model could be, although we're quite happy to make some guesses. GMC has its bases fairly well covered, with a mid-size and full-size crossover, as well as a mid-size, full-size and HD pickup. We doubt GMC will be building a family sedan, sports car, or hatchback, so really, the only place we can see the brand going is into a smaller crossover.
Automotive News points out that the most recent small GMC showcar, the 2010 Granite concept (shown above), won't see production according to General Motors. That vehicle likely would have rode on GM's compact vehicle architecture, known internally as Gamma II, which underpins the Chevy Spark and Sonic, as well as the Buick Encore (and its overseas Opel/Vauxhall/Chevy counterparts).

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.