2011 Gmc Acadia Sl Cloth Bench Seats * Towing Reciever * No Reserve* Clean Title on 2040-cars

Auto blog

GM recalls 3.6 million vehicles for airbag-software problems

The Basics: General Motors is recalling 3.64 million vehicles across its lineup for an airbag-related issue. The recall covers the 2014-2015 Buick LaCrosse, Chevrolet SS, and Spark EV; 2014-2017 Chevrolet Corvette, Trax, Caprice PPV, Silverado 1500, Buick Encore, and GMC Sierra 1500; and 2015-2017 Chevrolet Tahoe, Suburban, Silverado HD, GMC Yukon, Yukon XL, Sierra HD, Cadillac Escalade, and Escalade ESV. The Problem: Affected vehicles have a sensing and diagnostic module that controls the airbags and seat-belt pretensioners. The software it uses has a defect that can prompt the module to run a diagnostic test under specific driving conditions, which will also deactivate the front airbags and pretensioners. This means that it would be possible for those safety systems to not activate in a crash, potentially leading to injury or death. Injuries/Deaths: General Motors began an investigation that led to the recall after a 2014 Silverado was involved in a crash in which the airbags did not deploy. No information was given as to injuries or deaths. The Fix: Owners can bring their vehicles to a local General Motors dealer where a software update will be installed to fix the issue. The fix will be free of charge. If you own one: General Motors will contact owners of affected cars, and owners can check whether their vehicles are affected by visiting entering their vehicle identification numbers at either the GM Owner Center website or the NHTSA website. Owners can then schedule a time to have the update installed. Related Video:

2023 GMC Sierra AT4X could swipe a few parts from the AT4X AEV

GM recently expanded its collaboration with American Expedition Vehicles beyond the Bison herd with the 2023 GMC Sierra AT4X AEV. This Jimmy takes matters further than the standard AT4X by increasing ground clearance, approach and departure angle, and breakover angle, improvements made possible by new stamped steel bumpers and a set of 33-inch mud-terrain tires wrapping 18-inch AEV Salta wheels. GM Authority says the AT4X AEV won't be the only Sierra to get special parts, crediting sources for the news that the standard 2023 Sierra AT4X will get some of the equipment from the special trim. According to the report, at some point for the coming model year, the off-road-focused Sierra will bolt on the AEV's stamped steel front and rear bumpers, stamped steel front skid plate, and 33-inch Goodyear mud terrains. If this is true, it's an intriguing move; the equipment list is nearly everything found on the proper AEV model. Going by that list, the only bits left off would be four additional skid plates, wheels, gloss black door handles, gloss black tailgate accent, and AEV logos. Judging from the GMC retail website, the grille that debuted on the AT4X AEV will also be on the standard AT4X.  GMC hasn't announced pricing for the 2023 range yet. The pickup will be carryover, but we would expect various well-known issues to increase the $78,300 price of the regular AT4X over the 2022 model. GMA believes "it's reasonable to assume" that a standard 2023 Sierra AT4X with some AEV parts would go up even more, whenever it hits the market — and this is on top of the Sierra's $1,500 price increase from making OnStar standard equipment. And after that, of course, the proper AT4X AEV would be more again.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.