2011 Gmc Acadia Denali Sport Utility 4-door 3.6l on 2040-cars

Auto blog

2025 GMC Terrain spy photos show it inside and out

Chevy recently introduced the redesigned 2025 Equinox, but GMC has, so far, been silent about the Terrain, the Equinox's fraternal twin. But it does seem that there is a redesigned 2025 GMC Terrain on the way. These spy photos show the new model, and they reveal that the GMC will be even more distinct from the Equinox with this generation than the previous ones. From the outside, what we can see suggests the new Terrain will be more evolutionary than the Equinox. It still has a fairly upright nose with a tall grille and the C-shaped headlights. Along the side, there's still a distinct kink up at the back of the door that carries into the rear quarter window and around the back. Not many details are clear at the back, but new to this Terrain are visible exhaust outlets, a pair of rectangular ones sitting in cutouts at the base of the bumper. The inside is a massive change from the current model, and one that is quite welcome. The design clearly borrows from the also recently redesigned Acadia. It's centered around a monolithic screen with a center control knob and a set of physical switches at the screen's base. There doesn't seem to be much panel on either side of the screen, so the air vents may sit at the top of the screen. The instrument cluster is another screen, but a wide landscape-oriented example. The rest of the dash will probably be channeling some modern industrial looks with rectangular, horizontal and beveled panels. Since the new Equinox is launching this year, we're expecting this Terrain to launch this year, too, or ever so slightly later. It should be revealed in a few months to fit that launch window. It will undoubtedly get the same new platform used by the gas-powered Equinox, along with the turbocharged 1.5-liter four-cylinder with 175 horsepower. All-wheel and front-wheel drive should be on offer with an eight-speed automatic or CVT respectively. The GMC will also surely get a luxurious Denali trim and an off-road-oriented AT4 trim, the latter of which will probably get the addition of amber marker lights over the wheel arches like on the pickup trucks and the Acadia AT4. Related Video:

GM recalls select Tahoes, Yukons, Escalades for rear driveshaft issue

GM is recalling a number of its full-size SUVs due to an issue with the rear driveshaft assembly that could ultimately result in driveshaft failure. The actual number of total vehicles involved in the recall is small at just 1,789, but it’s spread out across the entire 2021 model year full-size GM vehicle lineup. That means a small number of every model is being recalled, including the Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL and the Cadillac Escalade and Escalade ESV. GM traced the issue back to certain driveshaft assemblies with ball bearings that were not properly heat treated. If theyÂ’re not properly heat treated, GM says that the balls may deform over time, causing noise and vibration. Continue to drive in this condition, and GM says the affected joint in the driveshaft assembly could seize, causing loss of drive power. However, the problem wonÂ’t present itself all at once, as GM says there will be a gradual increase of noises and vibrations before total failure. For those few owners with affected vehicles, GM says that it will replace the left and right rear driveshaft assemblies with properly-built units. Per usual with recalls, this will be done at your local dealership at no cost to the owner. If you have one of the recalled SUVs, expect to be notified mid-March. Related video:

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.