2009 Gmc Acadia Sle! One Owner, Very Clean, Power Everything! on 2040-cars

Auto blog

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:

2024 GMC Sierra 1500 AT4X makes Duramax diesel standard

Changes are afoot for the 2024 GMC Sierra 1500 lineup. The one ringing the biggest bells for the off-roading crowd is the engine swap headed to the AT4X trim. Right now, if you want an AT4X you've got Hobson's choice of engines: The 6.2-liter EcoTec V8 with 420 horsepower and 460 pound-feet of torque. Next year, the 3.0-liter Duramax turbodiesel inline-six that's standard equipment on the AT4 and Denali Ultimate trims becomes the standard engine on the AT4X. The oil-burner makes 305 hp and 495 lb-ft., sent through the same ten-speed automatic the 6.2 V8 is yoked to. GM said around 20% of buyers have checked the Duramax box when buying a Sierra 1500 since the automaker released the upgraded engine for the 2023 model year — it's also offered on the SLE, Elevation, SLT, and Denali trims. The percentage should grow thanks to the diesel's low-speed grunt being one of the best "force multipliers" when traipsing over and through particularly challenging corners of the woods. The 6.2-liter will take the exhaust note crown over the diesel after the introduction of an active exhaust system with a Sport mode exclusively for the 6.2. Assuming no more changes to engine lineups before the 2024 Sierra arrives, the SLT, AT4, Denali, Denali Ultimate, and AT4X will have access to the active exhaust option.   GM Authority says the Duramax is getting another maximal friend in 2024, too. The 2.7-liter Turbo High-Output four-cylinder makes 310 hp and 430 lb-ft and is standard equipment on the entry-level Pro trim. the SLE, and Elevation trims will be renamed "TurboMax," which sounds like an Autobot, and that's not a bad thing. GM applied to trademark the name in January. The new moniker is headed to the Chevrolet Silverado as well, and we'd bet on exterior badging to let the world know.  Elsewhere around the Sierra, there will be two new exterior colors, Downpour Metallic and Thunderstorm Gray, mixable and matchable with two new aluminum wheel designs. And between those wheels, power retractable steps will be available for the Denali, Denali Ultimate, AT4 and AT4X trims. We'll be waiting to see how the steps differ from the GMC MultiPro Power Steps available now for $1,195.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2014 Chevrolet Silverado tows in new configurator, microsite

Judging by your continued enthusiastic response to configurator notices, dear reader, you enjoy speccing out new cars as much as we do. Better still, there tends to be even more ways to personalize, configure and bloat theoretical MSRPs on full-size trucks as there are with more ordinary passenger cars. In addition to trim level, engine and transmission choices, truck buyers usually have to specify items like cab configuration, bed length, number of driven axles, tow packages, gear ratios and all sorts of bits and bobs.
That's why we're pleased to see the DIY specification utility for the 2014 Chevrolet Silverado come alive so soon after this week's Detroit Auto Show debut. While the configurator lacks pricing (General Motors hasn't announced numbers yet) and full options, you can still spec out your half-ton rig, and even print it out or email it to your friends. Beyond the configurator, the new model-specific site is pretty cool, too, with various videos and closer looks at the truck's new features.
The new Chevrolet pickup range won't be on dealer lots until sometime this summer, so whether you're a building contractor, an avid sportsman or just a guy or gal that loves full-size trucks, you might want to check out the link below to keep your appetite whetted. If you're more of a Sierra fan, well, it looks like you're going to have to wait a while - GMC hasn't updated its site yet.