09 White 3.6l V6 Automatic Leather Heated Power Seats Navigation on 2040-cars

Auto blog

GM resumes production of its 3.0-liter turbodiesel straight-six

General Motors temporarily stopped taking orders for trucks and SUVs equipped with the 3.0-liter Duramax turbodiesel six-cylinder engine in August 2021 due to a supplier shortage. Reports claimed the pause would last through 2021, but the engine is already back in production. Enthusiast website GM Authority learned from sources inside General Motors that the straight-six is once again coming off the assembly line at the Flint Engine Plant in Flint, Michigan. There's no official word on precisely what the problem was linked to and whether it was related to the on-going chip shortage that's wreaking havoc across the automotive industry. All we know is that the pause lasted for about two weeks. Called LM2 internally, the six is available in Chevrolet's Tahoe, Suburban, and Silverado 1500 and in GMC's version of these trucks. It's also an option in the Cadillac Escalade. It develops 277 horsepower at 3,750 rpm and a V8-like 460 pound-feet of torque at 1,500 rpm in every application, and it allows these big behemoths to post surprising fuel economy numbers. Fitted to a rear-wheel-drive Tahoe, the Duramax returns 21 mpg in the city, 28 mpg on the highway, and 24 mpg in a combined cycle, figures that make it more efficient than a Blazer. Demand for the diesel-powered trucks is relatively high. While the shortage undoubtedly took a toll on sales, the Duramax represented 8% of Suburban sales and 6% of Tahoe sales in May 2021. There are no other diesel-burning full-size SUVs available new so they have the market to themselves. On the truck side, Ram still makes the EcoDiesel available on some 1500 trims but Ford abandoned the segment. Related Video: Featured Gallery 2021 Chevrolet Tahoe RST View 24 Photos Chevrolet GMC Truck SUV Diesel Vehicles

2019 GMC Sierra 1500 SLE spy shots show new bumpers and tailgate

When the new 2019 GMC Sierra 1500 debuted two weeks ago, GM's truck division showed off just the two top trims, SLT and Denali. While the Denali might be the flagship Sierra, it's not likely to be the volume seller (though Denali models makes up almost a third of total GMC sales). These new spy shots show off the midrange SLE trim. It takes a more conservative, toned-down appearance compared to its brash brethren. The most obvious visual changes come at the front and rear. That big grille remains, but there are just three horizontal bars rather than the busier design from the SLT or Denali. The fog lights have been removed, too, though the C-shapped LED accent in the headlights has carried over. Out back, the SLE trim makes do without the trick MultiPro tailgate (it's limited to SLT and Denali models). It also has a different bumper as the exhaust exits just behind the right wheel. Badging on the fenders indicates that the truck has the updated 5.3-liter V8, meaning it's paired with an eight-speed transmission. The 6.2-liter V8 gets the new 10-speed auto. A 3.0-liter diesel inline-six will be available sometime down the road. GMC hasn't announced pricing, fuel economy or power ratings, but expect to see something in the next few months. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.