*$15,000 Off Msrp* Navigation - Rear Ent - Heated/cooled Seats -heads Up Display on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

GM Canada recalls 159,240 GMC and Chevy trucks for faulty defroster circuit

General Motors is recalling more than 159,000 2014-2019 Chevrolet Silverado and GMC Sierra pickup trucks in Canada due to a potential fire risk. GM says the rear defroster circuit could overheat on trucks optioned with the power-sliding rear window. Thus far, there is no word on the recall's relation to U.S. vehicles. The recall, found by Automotive News, was posted to Transport Canada on June 28, 2019 with manufacturer recall No. N192220470. Included in the 159,240 vehicles are the 2014-2018 Silverado 1500, the 2015-2019 Silverado HD, the 2014-2018 Silverado LD, the 2014-2018 Sierra 1500, the 2015-2019 Sierra HD, and the 2014-2018 Sierra LD. The notice says the rear defroster circuit, specifically on trucks with the power-sliding rear window, could overheat. Because of its placement, this excess heat could cause melting, smoking, or possibly fire, in the worst case scenario. As of now, there is no official word when GM will initiate the recall and there is no official fix detailed just yet. GM suggests that owners, who will be notified by mail if their vehicles are affected, take their trucks to a dealer to remove the rear window defroster fuse as a stop-gap.  Automotive News contacted GM to find out if the problem is also found in trucks sold in the United States, but no definitive statement was made, as the investigation is reportedly ongoing. We will update this space if American vehicles are found to be included in the problem.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.