Great Delivery Vehicle Or Work Truck. on 2040-cars

Auto blog

This 1969 Ford F-100 has a Cadillac CTS-V engine lurking underhood

Something always feels just a little taboo when someone builds a custom and then slots in a powertrain from a rival automaker. That's exactly the case with this modded 1969 Ford F-100 boasting a highly tuned LSA supercharged V8 like from the second-gen Cadillac CTS-V. However, with a claimed 800 horsepower on tap thanks in part to running an estimated 20 pounds of boost, it's easy to get over any bad feelings. Built by Tommy Pike Customs in South Carolina, the truck tries to keep the exterior looking somewhat stock. Although, the jade green and satin gold paint, Quaker State logo, lowered suspension and black wheels immediately suggest something is up. Once the F-100 starts up with its menacing growl, absolutely any doubts of this beast being unaltered are immediately gone. Not so obvious are some tweaks to actually help put all that power down, including disc brakes and independent suspension setups at the front and rear. The video gives some glimpses at a few of Pike's other creations, but the real star here is definitely his mean, green Ford.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ford Focus RS ready to make our hot hatch dreams real

Ford's current hot hatch siblings the Fiesta ST and Focus ST are already two pretty great entries into the segment, but there's always a desire for a little more. Thankfully, it looks like the Blue Oval is ready to satiate that need because it's continuing to test the even more powerful Focus RS around Europe. According to our spy shooters, these shots come from near the Nürburgring.
As with previous photos, Ford engineers continue to heavily camouflage the front end of the RS prototypes, but there's a big difference here. Unlike earlier ones, this example appears to have a closer-to-production-ready front bumper rather than just a horizontal strip for the license plate. That may point to development getting somewhat closer to wrapping up. Although, this one lacks the larger rear wing from prior testers, and the exhaust also appears to be a work in progress with the rear diffuser covered in mesh in these latest shots.
The RS is rumored to be using the 2.3-liter turbocharged four-cylinder from the 2015 Mustang, but power is reportedly turned up from 310 horsepower in the 'Stang to somewhere between 325 hp and 350 hp for the Focus. Routing all that just through the front wheels could be a recipe for serious torque steer, and all-wheel drive is potentially being used for better traction.