1970 Ford Torino Gt 351c 2v C4 9 Inch on 2040-cars

Auto blog

Ford Mustang Shelby GT350R-C set to storm Watkins Glen

Ford is bringing its latest high-performance Mustang back to the track with the new 2016 GT350R-C, which will debut and race in this weekend's IMSA Continental Tire SportsCar Challenge race at Watkins Glen. The spiritual successor to the Boss 302R that's still taking part in the Continental Tire series today, the first GT350R-C will be campaigned by Multimatic Motorsports. It's had its fully independent suspension completely revised for the track, and it gets everything from new spring rates to new anti-roll bars to a lowered ride height. Like the road-going GT350, a 5.2-liter, flat-plane-crank V8 sits under the hood, although Ford didn't release any specifics on power output. In fact, details are in short supply. We're expecting some sort of sequential racing transmission, wildly enhanced brakes, and a thoroughly race-prepared cabin, although Ford hasn't released any info on that stuff. The Blue Oval also hasn't said anything about the aerodynamic package, but strangely, it looks more or less like what's featured on the standard GT350R. The front fascia and rear wing are pretty much identical, and even the side sills seem roughly similar to the production model. "Like so many Mustangs before it, the Shelby GT350R is a car born to race," Ford's director of global performance, Dave Pericak, said in the attached press release. "We're taking it to the track as the GT350R-C and we're ready to see what it can do against the best competition in the world." Scroll down for the official press release from Ford. And if you're so inclined, you can check out the GT350R-C's debut race this weekend at IMSA.com, with coverage starting at 12:25 P.M. If you prefer normal TV, Fox Sports 1 will get around to re-broadcasting the race on July 5 at 10:00 A.M. Related Video: Ford Performance Shelby GT350R-C to Make IMSA Competition Debut at Watkins Glen • All-new Shelby® GT350R-C embodies Ford innovation through performance as race car makes its competition debut this weekend at Watkins Glen • Shelby GT350R-C to compete in the remainder of the 2015 IMSA Continental Tire SportsCar Challenge with Multimatic Motorsports • Competition version of Shelby GT350R features all-new 5.2-liter flat-plane crankshaft V8 created to extend on-track performance DEARBORN, Mich., June 24, 2015 – There's no mistaking the wicked sound or aggressive looks of the all-new Shelby® GT350R-C that Ford announced today would see its first official track time at Watkins Glen this weekend.

Performance CNG wants to crowdfund natural gas-powered Ford Mustang

Soliciting investments to develop a street-legal compressed natural gas (CNG) powered Ford Mustang that can deliver 470 horsepower certainly wouldn't make sense on a site called Indiestopstop. Nope, Indiegogo is the more-appropriately-named site that one Michigan entrepreneur is using to try and crowdfund his CNG 'Stang. He's looking to raise $55,000. Michigan's Daryl Patrishkoff and his company Performance CNG LLC showed off their converted 2003 Mustang last year at the Woodward Dream Cruise in Royal Oak, MI in an effort to get some exposure for the car, which can run on both gas and CNG. The company and its three-man team is looking to further develop the project in the name of a fueling source that is 40 percent cheaper than gasoline, throws off as much as 30 percent fewer tailpipe greenhouse gas emissions and makes the country less dependent on foreign oil. Performance CNG estimates that just 120,000 of the world's 15 million CNG-powered vehicles are in the US and is calling for more. As for the $55 grand, Patrishkoff estimates that more than half of that amount would be committed to the Environmental Protection Agency (EPA) testing of emissions, fuel economy and horsepower. The problem? As of right now, only $150 has been raised. Check out Performance CNG's press release below and see the fundraising effort on Indiegogo here. Eco-Friendly Muscle Car? CNG vehicles save money, emit less pollution and creates jobs from American-mined fuel SHELBY TOWNSHIP, Mich., May 5, 2014 /PRNewswire/ -- Daryl Patrishkoff of Shelby Township, MI, has a vision for the American automotive industry. He firmly believes that our fuel of choice should be Compressed Natural Gas (CNG), not gasoline. Until the full CNG infrastructure is in place a Bi-Fuel vehicle, fueled by either CNG or gasoline upon the drivers command, is the bridge vehicle that can lead this transition. Patrishkoff heads up a (3) man technical team developing this technology. The advantages are: 40 percent savings in fuel costs at the pump 25-30 percent reduction in harmful emissions 100 percent US provided natural gas Meaningful employment for the US economy The most important benefit, however, is that a CNG-powered vehicle runs on fuel that can be mined in America, eliminating the need for foreign oil. "After decades of political rhetoric, these types of vehicles can truly lead the US to energy independence," he said.

Ford Explorer, Expedition next to go aluminum?

Ford made some serious waves when it unveiled the latest F-150. Instead of making its bodywork out of steel, like just about every other truck on the market, Ford went with aluminum. And you can bet the F-150 won't be the last Ford model to go with the lightweight alloy construction, either.
Our compatriots at Edmunds report that Dearborn is considering replacing two of its most popular SUVs with aluminum versions. One candidate is the Expedition, which would make sense considering that the current model (like the two preceding generations and the fullsize Bronco before it) is based on the F-150's underpinnings. Another is the Explorer, which was traditionally based on the Ranger pickup but went with a car-like unibody chassis in its current iteration. If the Explorer does go the way of aluminum, don't expect it to be a part of its very next update, which is likely due too soon for such major changes.
It would stand to reason that, if the Expedition were to go aluminum, so would the next-generation Lincoln Navigator. Ditto the MKT together with the Explorer. But those aren't likely to be the only models in contention for aluminum construction. Like any other automaker, Ford is under pressure to steadily reduce its carbon emissions and improve its fuel economy figures, prompting it to look at a whole range of measures - including more efficient engines, lower rolling-resistance tires, active aerodynamics and lightweight construction. Expect aluminum to play a big part in that equation moving forward.