2004 Ford Thunderbird Convertible 2-door 3.9l on 2040-cars

Auto blog

Project Ugly Horse: Part VI

Solid axle? What solid axle?
I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation.
This should not have gone this easily. Having a long and checkered history of simple projects punctuated by much wailing and gnashing of knuckles, I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation when I finally decided to lay hands on the '89 Mustang with the goal of relieving the car of its stock rear axle. Instead, it took less than a full morning's worth of work to carve the old 7.5-inch solid axle from its moorings and mock up something, well, different.

Ford and Lincoln recall roundup: Explorer, F-350 Super Duty, Aviator

Ford and Lincoln released information on a flurry of recalls this morning. There are three in total, and they span different models and separate issues. Those models include the 2013-17 Ford Explorer, 2020-21 Lincoln Aviator and 2020-21 Ford F-350 Super Duty. We’ll organize these three in order of most cars recalled. 2013-17 Ford Explorer This recall includes a substantial 774,696 vehicles, of which 676,152 are in North America. Why? Ford says these vehicles “may experience a seized cross-axis ball joint that may cause a fractured rear suspension toe link.” The diminished steering control that would follow could increase the likelihood of a crash, Ford states. Only vehicles that spent time in high corrosion states should be affected, Ford says. That means places that lay salt down, experience cold weather and high humidity. Owners of these vehicles will need to take their car into the dealership, where it will be inspected to determine if it needs work. If so, Ford will replace the cross-axis ball joint/knuckle, then replace the toe links with a newly-designed part. Notifications to owners of these vehicles are scheduled to be sent out the week of August 23.  WeÂ’ll note that Ford is reporting six “allegations of injury” related to this issue. For those who donÂ’t live in the high-corrosion states/their car was never registered in those states, Ford is offering a customer satisfaction program in case you were interested in having the work done anyway. 2020-21 Lincoln Aviator Lincoln is pulling back 40,995 new Aviators due to an improperly secured battery cable wire harness. This recall applies to gasoline-only versions of the Aviator, so Grand Touring PHEV buyers neednÂ’t worry. The wire harness may contact the AC compressor pulley due to it being secured improperly. Ford says that over time, the pulley could rub through the wire harnessÂ’ insulation, resulting in a short circuit and ultimately a fire. However, Ford is not currently aware of any injuries or fires related to this concern as of now. When you bring your car in, the dealer will inspect all the parts to determine what needs to be done. Fixes range from a basic tie strap to keep the harness away from the pulley (if it hasnÂ’t made contact yet), to replacement of the wire harness and AC belt if the contact has caused damage. Owners should expect to be notified the week of July 30 if their Aviator is involved in the recall.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: