1964 Ford Thunderbird,390 Aotomatic With Ac, Orginal,burgendy With Black Intr on 2040-cars

Auto blog

Ford recalls select Explorer, E-Series vans

Just a few days ago we brought you news that Ford had issued a recall on 28,000 units of the Edge crossover for problems related to the fuel line. But now the Blue Oval has issued recall notices on two more of its larger vehicles.
The first relates to the Explorer, 395 examples of which from the 2011 and 2012 model years were found to have problems with their steering systems if they underwent service after September 1, 2013. An apparent software glitch could lock the steering gear, preventing the driver from steering the vehicle and thereby increasing the risk of a crash. As a result, Ford dealers are being instructed to check their records to identify the problematic vehicles and bring them in to have the steering gear replaced. Details of the recall can be found in the PDF linked here.
The second problem revolves around E-Series vans that may develop bubbles in their windshields under hot temperatures. The decrease in visibility through the problematic windshield could - you guessed it - "increase the risk of a crash." As a result, Ford is calling in 4,532 units of the E-150, E-250, E-350 and E-450 vans built in the relatively short window between May 12 and May 26, 2011. Details of this recall can be found in the notice below from the National Highway Traffic Safety Administration.

2020 Ford Explorer ST vs 2019 Dodge Durango SRT: How they compare on paper

For a few years now, the Dodge Durango SRT has been the sole three-row performance crossover from a non-luxury brand. That all changes now that the 2020 Ford Explorer ST is coming to market. Now we have two family crossovers with rear-drive-based platforms vying for buyers that demand practicality and power. As such, there's no better time to dig into their specs to see how they compare. We'll check out each crossover's horsepower, torque, space, capability and prices. The full specs are listed below, followed by some analysis afterward. We also compared the regular 2020 Explorer models to other crossovers in this segment, if if that's not enough, you can check out our car comparison tool. Performance The Explorer and Durango go about making power in very different ways. The Explorer goes the force-fed route with two turbos feeding a 3.0-liter V6, while the Durango's enormous 6.4-liter V8 produces power with air flow au natural. Of the two, the Durango has the greater output of 475 ponies and 470 pound-feet of torque, feeding the flames of everyone that lives by the phrase "There's no replacement for displacement." The Explorer is no slouch at 400 horsepower and 415 pound-feet of torque, though. Performance isn't purely based on power, though. Other factors play a role, such as weight, and in that regard, the Explorer is way ahead. At 4,701 pounds, it weighs a massive 809 pounds less than the portly Durango. This also means that both crossovers are very close in weight-to-power ratio, with the Explorer only slightly worse at 11.75 pounds per horsepower and the Durango at 11.6. Less weight will also play a roll in handling, and the Explorer is likely to feel sprightlier without so much mass to shift back and forth. Semi-related to handling are tire sizes. The Durango features 295-mm wide tires on 20-inch wheels. The Explorer has 255-mm wide tires on 20-inch wheels, but 21-inch wheels with 275-mm tires are available. So the Durango is working with more contact patch, but as we mentioned, it's carrying a lot more weight. 2020 Ford Explorer ST View 20 Photos Interior Space and Practicality Although the Durango SRT is the largest on the outside in every dimension, it loses out to Explorer repeatedly inside. The Ford has more headroom, leg room and shoulder room in nearly every row except the third-row where headroom comes up a bit short.

Ford continues autonomous tech development

Some of the autonomous-driving features that Ford offers in Europe will come to the United States as soon as next year. The Blue Oval will add the pre-collision assist and pedestrian detection technologies that it has already installed on the Mondeo sedan in Europe. Those features, part of what Ford calls the "second of three phases" in driverless technology, will be brought stateside in a yet-to-be disclosed model, while most of Ford's US vehicle line will have the features by 2019. It has been testing an automated Fusion for more than a year. Ford is looking to build upon the autonomous-vehicle technology that it already has on models such as the Fusion, Taurus, F-150, Edge, and Explorer. Those amenities include active-park assist, lane-departure warning, and blind-spot monitoring. Ford said early last year that it was working with the Massachusetts Institute of Technology (MIT) and Stanford University to develop algorithms for use in driverless cars. The effort is part of Ford's so-called "Blueprint for Mobility" geared toward autonomous driving features that are being developed over the next decade. FORD COLLABORATES WITH SILICON VALLEY INNOVATION ECOSYSTEM ON AUTONOMOUS VEHICLES, 3D PRINTING, WEARABLE TECHNOLOGY Autonomous vehicle technology is another step closer to production at Ford – moving from a research effort to an advanced engineering project Ford announces it is working with Silicon Valley-based 3D-printing firm Carbon3D to quickly produce high-quality automotive-grade parts Ford kicks off wearable technology development with MyFord® Mobile app extension – coming soon to smartwatches including Android Wear – providing customers the ability to check vehicle driving range, battery charge and more for their plug-in hybrid or electric vehicle quickly from their wrists Autonomous vehicle technology is another step closer to production at Ford, moving from a research effort to an advanced engineering program, the company announced today. Ford has appointed a director of autonomous vehicle development – 29-year Ford veteran Randy Visintainer – and created a global team to work on the advanced program. Ford Research and Innovation Center Palo Alto is working on the global Ford team to deliver the Ford Smart Mobility plan, which aims to take the company to the next level in connectivity, mobility, autonomous vehicles, the customer experience and big data.