2013 Ford Taurus Limited/3.5l/rear Sensors/camera/leather/sync/clean on 2040-cars

Auto blog

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

Ford recalls 300,000 Crown Vics over lighting module

The Basics: Ford is recalling 312,814 units of the Crown Victoria and Mercury Grand Marquis sedans from the 2003-2005 model years. They were built at the St. Thomas Assembly Plant between Oct. 3, 2001, and Aug. 2, 2005. Ford says 296,004 of those units are located in the United States, with another 14,714 in Canada and 2,096 in Mexico. The Problem: The solder joints on the lighting control module could crack, depriving the headlamps of the power they need to light the way ahead. That could increase the risk of a crash, particularly at night and in other low-visibility situations. Injuries/Deaths: Ford reports that it is aware of 11 accidents that resulted from the problem, leading to one injury described as "minor." The Fix: The manufacturer is instructing dealers to replace the entire lighting control module. If You Own One: Make sure your headlights are working before getting under way. If they're not, avoid driving under low-light conditions, including at night, in heavy precipitation, or in fog. Ford Issues Three Safety Recalls and One Safety Compliance Recall in North America DEARBORN, Mich., Dec. 22, 2015 – Ford Motor Company is issuing three safety recalls and one safety compliance recall in North America. Details are as follows: Ford Motor Company issues safety recall for certain 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles to replace lighting control module Ford Motor Company is issuing a safety recall for approximately 313,000 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles to replace a lighting control module. The solder joints on the module could crack and interrupt power to the headlamps – increasing the risk of crash at night. Ford is aware of 11 reports of accidents and one report of a minor injury related to this issue. Affected vehicles include certain 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles built at St. Thomas Assembly Plant, Oct. 3, 2001 through Aug. 2, 2005. There are a total of 312,814 vehicles that might be affected in North America, including 296,004 in the United States and federalized territories, 14,714 in Canada and 2,096 in Mexico. Dealers will replace the lighting control module at no cost to the customer. Ford issues safety recall for certain 2016 Ford F-650 and F-750 vehicles to replace rear air brake chamber Ford is issuing a safety recall for 177 2016 Ford F-650 and F-750 vehicles to replace the rear air brake chamber.

Uber releases fleet of self-driving vehicles to select few in Pittsburgh

Starting today, a select group of Uber users in Pittsburgh, PA will have the ability to request a self-driving vehicle. If a self-driving vehicle is in the area, Uber will send it, as well as a safety driver, to drive loyal customers to their destination. The announcement to give customers the opportunity to get a ride in one of Uber's self-driving vehicles comes roughly a year and a half after the company set up its Advanced Technologies Center in the city. On Tuesday, the company offered a few members of the press the opportunity to ride in one of the company's self-driving cars. The fleet, despite Uber's collaboration with Volvo, was comprised of 14 Ford Fusions equipped with a host of self-driving technology, reports TechCrunch. Uber is giving away free rides as a way to obtain real-world testing, which is crucial for self-driving technology. Recently, nuTonomoy beat Uber to the punch by launching the world's first autonomous taxis in Singapore. While the choice to release its self-driving cars in Pittsburgh mainly comes down to the fact that its ATC is located there, the city faces four seasons and its difficult streets that are comprised of bridges, railroad lines, and an irregular grid layout will prove to be a challenge for the autonomous cars. Since the self-driving vehicles are still being tested, the cars will come with two full-time Uber employees. One employee will loosely grasp the car's steering wheel, ready to take over if something goes awry, while the other will monitor the computer's software. As TechCrunch points out, Uber's autonomous vehicles drove in a similar manner to a regular driver. It obeyed traffic laws, mimicked a driver by coming to stops gently and at other times abruptly, as well as driving slightly into another lane to dodge a poorly-parked vehicle, reports TechCrunch. There's no word on whether regular Uber customers will get a ride in one of the company's Fusions or one of the Volvo's that its working on. Automakers and companies alike have been in a race to put autonomous vehicles on the road. Tesla recently updated its Autopilot system, Apple laid off dozens of employees to reboot its self-driving car project, and Google is working giving its autonomous vehicle the ability to detect emergency vehicles. While this is a large step for Uber, vehicles with autonomous capabilities still have a long way to go.