2008 Ford Taurus Limited Low Original Miles on 2040-cars

Auto blog

‘Ford v. Ferrari’ hype prompts Ford to open its Le Mans GT40 vault

“Ford v Ferrari,” the big-screen adaptation of a book about the famous rivalry over racing supremacy in the 1960s, opens next week, and the fevered anticipation has prompted Ford to revisit that period of its storied history by opening its GT40 Le Mans vault. Literally. The Detroit Free Press reports that a group of Ford executives and staffers gathered this week at the Ford Engineering Laboratory in Dearborn to view vintage artifacts from the years-long duel between the intercontinental automakers and reminisce. Those archives contain an incredible 3 miles of shelving, a video vault maintained at 41 degrees and an actual safe. The archives manager reportedly wore protective white gloves and removed the only known copy of the original plans for the GT project. Also shown was an exact replica of the GT40 driven by Bruce McLaren at the 24 Hours of Le Mans in 1966, the year Ford finally vanquished perennial winners Ferrari form the victory podium. It was created and used for the film, with more than 500 miles added to the odometer during filming. Directed by James Mangold (“Walk the Line,” “The Wolverine”) and produced by 20th Century Fox, the film hits theaters Thursday and opens wide Nov. 15. ItÂ’s based on A.J. BaimeÂ’s 2009 book “Go Like Hell: Ford, Ferrari and Their Battle for Speed and Glory at Le Mans.” The film predictably takes some liberties with the real-life story and characters. It focuses on the relationship between Carroll Shelby (played by Matt Damon), whom Henry Ford II and Lee Iacocca charged with developing a Ferrari-beating GT, and maverick British driver Ken Miles (Christian Bale). The Blue Oval had no involvement in the making of the film, beyond offering up archival material for background research. “It was, wow, especially if you had to go out and service a car during a pit stop,” Mose Nowland, a retired mechanic and sports car engineer who worked on the GT40 Le Mans program and spent 57 years with Ford, told the Freep. “Your hip pockets are only several inches away from cars going by at 160 mph.” Read the full Freep story here.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

2020 Ford Explorer vs 3-row crossover rivals: How they compare on paper

The 2020 Ford Explorer has finally landed, and if history serves as an indicator, it should be bigger than sliced bread. And people sure love themselves some sliced bread. This new Explorer may look familiar on the outside, but beneath the skin is a radically new rear-drive platform related to the Ford Mustang (as opposed to a front-drive platform related to the Ford Taurus and a Volvo from the 1990s). Turbocharged four- and six-cylinder engines now exclusively rest under its hood, which as you'll see below, both better anything its competitors offer. Ah, but if you're curious to know how the new 2020 Explorer compares to its various three-row family crossover rivals, take a look at the chart below where we stack it up against the 2019 Chevrolet Traverse, 2019 Honda Pilot, 2020 Hyundai Palisade, 2019 Subaru Ascent and 2019 Toyota Highlander. There are others of course (Mazda CX-9, Dodge Durango, GMC Acadia, VW Atlas), but we only had so much room on the chart, and these were the newest and/or most likely to be cross-shopped with the new Explorer. Engine specs and towing Although the Traverse's V6 just nips it on horsepower, the 2020 Explorer's base 2.3-liter "EcoBoost" turbocharged four-cylinder engine smokes it on torque. Therefore, "best-in-class" power seems like a fair claim from Ford. That there's also a 365-horsepower turbo V6 available, plus a hybrid and even-more powerful ST model on the way shows that Ford isn't kidding around under the hood. Curb weight also seems competitive for the segment. In terms of drivetrain, the Explorer is the only member of this particular group to come standard with rear-wheel drive (2.3-liter only). The Durango is the only other three-row, non-luxury crossover to do so. This is significant for two reasons: First, you could potentially do a power slide in an Explorer. Second, and more important, those in the Snowbelt will have to opt for all-wheel drive (it comes standard with the 3.0-liter). By contrast, a set of winter tires will probably do the job just fine if you want to save some money and gas by sticking with its rivals' standard front-wheel drive. Well, except for the Subaru Ascent — that's standard with AWD. In terms of towing, the Explorer takes the cake with as much as 5,300 pounds for the four-cylinder and 5,600 pounds for the V6. Everything else tops out at 5,000, though again, the Durango is capable of besting them all thanks to its Hemi V8 engine option.