2006 Ford Taurus, Runs Great, 110,500k Miles, 2nd Owner Since 2007 on 2040-cars
Crystal Lake, Illinois, United States
Body Type:Sedan
Vehicle Title:Clear
Engine:V6
For Sale By:Private Seller
Number of Cylinders: 6
Make: Ford
Model: Taurus
Trim: SE Sedan 4-Door
Options: CD Player
Drive Type: Front
Safety Features: Driver Airbag, Passenger Airbag
Mileage: 110,500
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Sub Model: SE
Exterior Color: Tan
Warranty: Vehicle does NOT have an existing warranty
Interior Color: Tan
Tan with tan interior. Good condition inside and out. Minor scratches on rear bumper and cracked trim piece in front. See pictures for details. New tires 10K miles ago. New plugs/wires, fuel filter and battery within the last year. Transmission service completed 5K miles ago. Car has had all preventative maintenance. Only selling due to receiving a company provided vehicle. Car was bought used w/ 5K miles in 2007 and has had no issues. Cash or PayPal only. Please ask any questions you have prior to bidding. Car is sold as is with no warranty. Very nice care for the money.
Ford Taurus for Sale
2003 ford taurus ses(US $2,800.00)
1995 ford taurus w/ 90,000 miles
*police special edition* palm beach county sheriff's office car - clean 1 owner
1994 ford taurus gl wagon 4-door 3.0l(US $1,300.00)
2012 limited sedan fwd leather reverse sensing v6 we finance 23k miles
13 limited all-wheel drive navigation leather sync sat radio rear camera(US $27,900.00)
Auto Services in Illinois
Woodfield Nissan ★★★★★
West Side Tire and Alignment ★★★★★
U Pull It Auto Parts ★★★★★
Trailside Auto Repair ★★★★★
Tony`s Auto & Truck Repair ★★★★★
Tim`s Automotive ★★★★★
Auto blog
50 new vehicles by 2025: Ford making big push in China
Tue, Dec 5 2017SHANGHAI — Ford will launch 50 new vehicles in China by 2025, including 15 electrified vehicles, the U.S. firm said at an event in Shanghai on Tuesday, as it looks to rev up sales growth in the market and shift towards cleaner electric cars. Ford's sales in China have been weak in recent months, and the company is scrambling to come up with electric and hybrid vehicles to comply with strict Chinese quotas over production and sales for so-called new energy vehicles, or NEVs. The U.S. automaker is undergoing a broad review of its China operations, part of a strategic re-think under new Chief Executive Officer Jim Hackett, which will likely see the company focus on electric commercial vans as well as electric cars. "Between now and 2025, we will launch 50 new vehicles in China, and of those 50 new vehicles, 15 of them will be all-new electrified vehicles," said Peter Fleet, Ford's head of Asia Pacific, pointing to big growth in the "utility" segment. Fleet also said Ford's China revenue would grow by 50 percent over the same period. China is pushing automakers toward electric and hybrid petrol-electric vehicles, setting tough quotas for NEVs that come into play in 2019, and has signaled a longer-term shift away from traditional internal combustion engine cars. The major shift in the world's largest auto market has jolted some automakers, sparking a spate of recent electric vehicle (EV) joint ventures in the market. Ford has announced an EV tie-up with China's Anhui Zotye Automobile Co Ltd. "We've never seen change like we do today," said Ford Executive Chairman Bill Ford. "Everything is being disrupted" by the development of autonomous vehicles, trends such as ride-sharing and electric vehicles, he added. "It's clearly the case that China will lead the world in EV development, and so we at Ford are investing enormous amounts of money both here in China and globally to bring electrification into fruition." Reporting by Adam JourdanRelated Video: Image Credit: Reuters Auto News Green Plants/Manufacturing Ford Lincoln Electric Hybrid Shanghai Jim Hackett
2017 North American Car, Truck, and Utility of the Year entries announced
Wed, Jul 6 2016Over 40 vehicles will compete for the 2017 North American Car, Truck, and Utility of the Year awards. If that name looks a little strange, it's because the competition added a third category. In years past, pickup trucks, crossovers, SUVs, commercial vans, and minivans competed for the same award. That's why there were occasionally weird comparisons, like last year's competition between the Volvo XC90 and Nissan Titan XD. The new format separates pickups and commercial vans into the truck contest and CUVs, SUVs, and minivans into the utility competition. A complete list of eligible vehicles is below, but here are a few highlights. For one, the entire list of entries has a luxurious lean. Of the 43 vehicles, nearly half of them are from premium brands. There are two eligible Bentleys – the Bentayga and Mulsanne – the Rolls-Royce Dawn, Jaguar F-Pace, Audi Q7, and the Mercedes-Benz GLS-, E-, and S-Class Maybach. The performance ranks are lofty, too, with the Audi R8, Acura NSX, Alfa Romeo Giulia, Mercedes SL- and SLC-Class, Porsche 718, and F-150 Raptor. The mainstream entries are just as comprehensive. From the Chrysler Pacifica to the Chevrolet Cruze to the Fiat 124 Spider to the Mitsubishi Mirage, NACTOY has covered an enormous price range with this year's contestants. Of course, these are only the eligible vehicles. They'll need to run through three rounds of judging, starting in September at NACTOY's traditional Hell, MI, test drive. The Canadian and American journalists involved in the judging will announce this year's nine finalists – three in each category – on December 6. Cars Acura NSX Alfa Romeo Giulia Audi A4 Audi R8 Bentley Mulsanne Buick Cascada Buick LaCrosse Cadillac CT6 Chevrolet Bolt Chevrolet Cruze Fiat 124 Genesis G90 Hyundai Elantra Infiniti Q60 Jaguar XE Kia Cadenza Lincoln Continental Mercedes-Benz E-Class sedan Mercedes-Benz S550 Maybach Mercedes-Benz SL-Class Mercedes-Benz SLC-Class Mini Clubman Mitsubishi Mirage/G4 Porsche 718 Boxster and Cayman Rolls-Royce Dawn Toyota Prius Prime Volvo S90 SUVs Audi Q7 Bentley Bentayga Buick Envision Cadillac XT5 Chrysler Pacifica GMC Acadia Infiniti QX30 Kia Sportage Mercedes-Benz GLS-Class Jaguar F-Pace Mazda CX-9 Nissan Armada Trucks Ford F-Series Super Duty pickups Ford F-150 Raptor Honda Ridgeline Nissan Titan half-ton Related Video: Featured Gallery Bentley Bentayga View 23 Photos News Source: Automotive News - sub.
How Ford switched gears for the all-new F-150
Fri, Mar 6 2015Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.