2005 Ford Taurus Se - 3.0l V6 - 289052 on 2040-cars

Auto blog

NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video:

Ford recalls 277,000 Super Duty trucks over foggy rear-view camera

Ford has issued a recall that applies to around 277,000 units of the Super Duty pickup built between the 2017 and 2020 model years. The campaign also includes about 13,000 units of the Lincoln Continental, and it aims to fix an issue that makes the rear-view camera foggy. Assigned recall number 22V-644 by the National Highway Traffic Safety Administration (NHTSA), the recall includes 139,131 units of the F-250, 109,960 units of the F-350, 14,830 units of the F-450, and 13,119 units of the Continental. The affected trucks are all fitted with the Ultimate Trailer Tow Camera system and were built between November 12, 2015, and March 10, 2020, while the affected Lincoln models are equipped with the 360-degree camera and were made from November 30, 2015 to March 10, 2020.  Ford explains "degradation of the coating on an internal rear-view camera lens can lead to a progressively foggy or cloudy image." It adds ultraviolet radiation causes the problem and that this issue increases the risk of an accident, though it's not aware of accidents or injuries. Owners of affected cars and trucks who have already paid to get the issue fixed have until September 30, 2022, to ask Ford for a refund. The company will begin notifying customers about the recall by mail on September 12, 2022, and it will ask them to take their vehicle to the nearest authorized dealer to get the rear-view camera replaced free of charge. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Restoring Headlights | Autoblog Details | Complete Detail Bonus

For thousands of US auto workers, the downturn is already here

LORDSTOWN, Ohio - Wall Street is fretting that the auto industry is heading for a downturn, but for thousands of workers at General Motors factories in the United States, the hard times are already here. Matt Streb, 36, was one of 1,200 workers laid off on Jan. 20 - inauguration day for President Donald Trump - when GM canceled the third shift at its Lordstown small-car factory here. Sales of the Chevrolet Cruze sedan, the only vehicle the plant makes, have nosedived as consumers switch to SUVs and pickup trucks. Streb is looking for another job, but employers are wary because they assume he will quit whenever GM calls him back. "I get it," said Streb, who has a degree in communications, "but it's frustrating." Layoffs at Lordstown and other auto plants point to a broader challenge for the economy in Midwestern manufacturing states and for the Trump administration. "This is about economics, not what Trump says. Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." The auto industry's boom from 2010 through last year was a major driver for manufacturing job creation. The fading of that boom threatens prospects for US industrial output and job creation that were central to Trump's victory in Ohio and other manufacturing states. "This is about economics, not what Trump says," said Robert Morales, president of United Auto Workers (UAW) union Local 1714, which represents workers at GM's stamping plant at Lordstown. "Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." Last week the Federal Reserve said factory output fell 0.4 percent in May, the second decline in three months, due partly to a 2 percent drop in motor vehicles and parts production. Mark Muro, a senior fellow at the Brookings Institution, has compiled data from government sources that show the auto industry punching higher than its weight in job creation in recent years - accounting for between 60 percent and 80 percent of all US manufacturing jobs added in 2015 and 2016. In the first quarter of this year, the auto industry accounted for less than 2 percent of the 45,000 manufacturing jobs created. "There's no argument with the idea that auto has been pulling the manufacturing sled up the mountain for the last three or four years," Muro said.