2000 Taurus Se Automatic 4-door Sedan Inspected Non Smoker No Reserve Cd A/c on 2040-cars

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Ford hurt by 2015 F-150 production restraints

The new 2015 Ford F-150 came out of the gate strong for January 2015 with all F-Series sales up 17 percent for the month. However, February tempered those gains a bit with the model line dipping 1.2 percent, and the Ford brand itself dropped 1.7 percent year-over-year. The fall is being blamed in part on tight supply of the latest pickup. A major factor holding back the 2015 F-150 is that they are only currently being made at the Dearborn Truck Plant. The Kansas City factory is still changing over, and full supply from them both is expected by the middle of the year. Ford also just announced plans to hire an extra 1,550 people to build the pickups, including 900 in Kansas City. However, the downtime in the assembly changeover has caused about 90,000 units in lost production since mid-2014, according to The Detroit Free Press. It's not all bad news for the pickup, though. The latest F-150 made up 21 percent of F-Series sales in February, according to The Detroit Free Press, up from 18 percent in the previous month, and they remained on dealer lots an average of 18 days. The lessened supply has also meant lower incentives. Mark LaNeve, Ford's US marketing boss, told the Free Press that average F-150 transaction prices were up $2,000 from last year. He also indicated that retail figures grew seven percent in February, while F-Series fleet numbers were down 18 percent. The constrained supply does come at an inopportune time for Ford, though. This year is expected to be huge for pickups. Also, lower gas prices appear to be pushing people towards SUVs and trucks recently. Related Video:

Slew of Ford recalls affect more than a million vehicles

Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19. The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it's probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.  The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle's wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford's reference number for this is 20S56. The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford's internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly. Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue.