2008 Ford Ranger Xlt Standard Cab Pickup 2-door 2.3l on 2040-cars
Maynardville, Tennessee, United States
Engine:2.3L 140Cu. In. l4 GAS DOHC Naturally Aspirated
Vehicle Title:Clear
Body Type:Standard Cab Pickup
Fuel Type:GAS
Mileage: 39,000
Make: Ford
Exterior Color: Red
Model: Ranger
Interior Color: Gray
Trim: XLT Standard Cab Pickup 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Number of Cylinders: 4
Options: CD Player, satellite radio
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Power Options: Air Conditioning, Cruise Control
08 ranger xlt single cab short bed 39000 miles one owner oil change every 5k miles. has cd and sat radio leather wrapped steering wheel cruise control cloth seats manual locks and windows. Truck is in great shape does have a couple dings to tailgate and some scratches in the bed due to use. ask any questions you may have
Ford Ranger for Sale
2011 ford ranger "xlt supercab 4-dr". 1-owner. "like new" low miles 4.0l. loaded(US $7,800.00)
1997 ford ranger xlt standard cab pickup 2-door 4.0l low/low miles !
2008 ford ranger xl standard cab pickup 2-door 2.3l(US $7,995.00)
2001 ford ranger xlt extended cab pickup 4-door 3.0l(US $3,800.00)
1996 ford ranger splash standard cab pickup 2-door 2.3l
2011 ford ranger sport 4 door supercab 4x4(US $23,295.00)
Auto Services in Tennessee
White`s Towing & Recovery ★★★★★
Universal Kia Franklin ★★★★★
United Auto Service ★★★★★
Transmissions INC ★★★★★
The Wash Spot Inc ★★★★★
Solar Pros Window Tinting ★★★★★
Auto blog
Ford's new Focus RS hatches hot and heads for America
Tue, Feb 3 2015The hot hatch market is heating up, and heating up fast. What you see here is Ford's new challenger for pocket-rocket supremacy, the third iteration of the breed and the 30th model to wear the Rallye Sport designation. But perhaps best of all, it will be the first time Ford will offer a new Focus RS in America. Following yesterday's leak, the latest Ford Focus RS is now ready to step out into the light and light up its tires. Answering the call is the same 2.3-liter EcoBoost turbo four as you'd find in the new Mustang, but upgraded with a new low-inertia twin-scroll turbocharger, larger compressor and intercooler, freer-flowing intake, large-bore dual-pipe exhaust with electronically controlled valve and upgraded internal components. The result is a 6,500-rpm redline (closer to that of Ford's atmospheric performance engines) and an output quoted as "well in excess of 315 horsepower" – which is already 5 more than the EcoBoost Mustang and a good 63 more than the existing Focus ST. Power is transmitted to the tarmac through a new performance-focused all-wheel drive system with torque vectoring that can send as much as 70 percent of available twist to the rear wheels (and as much as 100 percent between them). The system works in tandem with the brake-based torque vectoring system and stability control, and will even divert torque to the outside rear wheel under cornering to keep it flat and under control while reducing understeer. Those still suspicious of dual-clutch gearboxes will also be pleased to read that Ford has stuck with a conventional six-speed manual. We'll reserve judgement on the inclusion of the electric power steering until we get a chance to drive it, though. Of course the small team of global Ford Performance engineers who developed the new Focus RS – and the Gymkhana legend Ken Block who consulted on the project – didn't just tinker with the powertrain and leave it at that. The suspension features stiffer spring rates, bushings and anti-roll bars than the Focus ST, augmented by two-mode switchable dampers. 19-inch alloys wear Michelin Pilot Super Sport rubber, with optional Pilot Sport Cup 2 semi-slicks for track-day enthusiasts. Ford has yet to detail the brakes on its new hot hatch, but you can bet they've been upgraded as well.
Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day
Thu, 13 Feb 2014Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.
Are you Ford's next Bullitt Mustang? [w/poll]
Thu, 27 Mar 2014Ford has a long history of offering special editions of its legendary Mustang. One of the most vaunted of those trim packages, though, has only been offered twice. The first time was in 2001, and then again in 2008. Yes, we're talking about the Bullitt.
Named for the infamous Dark Highland Green Mustang Fastback driven by Steve McQueen in the 1968 cop melodrama Bullitt, the car was famous for not just its pilot, but the high-speed chase it took part in during the movie. Now, we think we have images of the next Bullitt.
According to our spy photographers, the paint is a "dead-ringer" for the Dark Highland Green that has signified these special edition Mustangs. While we're inclined to agree, it's also worth pointing out that this shade looks very similar to one of the 2015's other new colors, Guard. We've yet to see one on the road (let alone in such dreary conditions), so it's tough to say for certain.