1995 Ford Ranger Xl Extended Cab Pickup 2-door 2.3l on 2040-cars

Auto blog

Ford recalls 200K Escape, Transit Connect models over instrument panel

Ford is announcing two new recalls that cover a total of 203,494 vehicles in North America. By far the larger of the campaigns is a recall for 203,445 examples of the 2014-2015 Escape and Transit Connect in North America. Specifically, there are 182,520 units recalled in the US, 18,226 in Canada, and 2,699 in Mexico. For these models, the instrument cluster, warning messages, lights, and chimes might not work at startup. This problem puts the vehicles out of compliance with the federal motor vehicle code, and the fix is a software update. The other recall is minuscule and only affects 49 units of the 2015 Transit that are owned by a single fleet customer. The company's vans have a specially ordered front passenger seatbelt, but the parts aren't labeled correctly under the federal code. Everything works properly, though, according to Ford. The fix is simply a new decal with the required info. No accidents or injuries are known to be related to either of these two recalls. Related Video: FORD ISSUES TWO SAFETY COMPLIANCE RECALLS IN NORTH AMERICA DEARBORN, Mich., June 24, 2015 – Ford is issuing two safety compliance recalls in North America. There are no accidents or injuries attributed to these conditions. Details are as follows: Ford issues safety compliance recall for certain 2014-2015 Transit Connect and Escape vehicles for instrument panel issue Ford Motor Company is issuing a safety compliance recall for approximately 203,500 2014-2015 Transit Connect and Escape vehicles in North America for an issue with the instrument panel cluster. When starting the vehicle, the instrument cluster, warning chimes, messages and warning lights may not work, which is a compliance issue with FMVSS 101 and other applicable FMVSS requirements. If these displays don't work as intended, it could increase the risk of a crash. Ford is not aware of any accidents or injuries associated with this issue. Affected vehicles include certain 2014-2015 Transit Connect vehicles built at Valencia Assembly Plant in Spain, May 13, 2014 to Dec. 10, 2014 and certain 2014-2015 Escape vehicles built at Louisville Assembly Plant, May 19, 2014 to Feb. 6, 2015. There are 203,445 vehicles in North America, including 182,520 in the United States and federalized territories, 18,226 in Canada and 2,699 in Mexico. Dealers will update the instrument panel cluster software at no cost to the customer.

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.

Ford patents a multi-touch version of its classic keypad

For decades, Ford has offered a keypad on the doors of their cars that would allow owners access with the right code. Amazingly, the keypad has survived almost unchanged except for a recent touch button version. A new patent from the Blue Oval shows the keypad may get a big upgrade soon. The first big change is that it looks like the keypad may move to the key fob. Although it might be possible to have it on the car itself as well, the patent only seems to focus on the key fob. In addition, the fob will now be a multi-touch pad similar to that of modern smartphones. This will allow for more diverse code entries, according to the patent's description. Instead of just a simple number code, owners could enter a code that involves swipes and keystrokes, and even simultaneous keystrokes. For instance, you could enter a code that requires swiping from 1 to 3, followed by holding 2 and 4 to unlock the car. The patent also seems to indicate that this keypad would then display unlock functions and other functions on the fob after the correct code is entered, thus making it more than just a way to unlock the car. As for the practical implications of this keypad system update, it could provide an added layer of security. If someone steals your keys, they would have to also know your access code to get into the car. Whether this would also help make the key and car harder to hack would remain to be seen, though. Another possible benefit could be the prevention of accidental lock and alarm button presses, although that likely isn't a common issue. There could be potential downsides as well. If used as an extra layer of security, the legitimate owner would have to punch in their code on the fob to get in, which would render proximity key benefits relatively useless. Moving the keypad to the fob would also mean owners couldn't get into their cars without having the key with them. We don't have any clues as to when this could become a feature, but it doesn't seem like it would be difficult to implement, so it could show up in the next few years. Related Video: News Source: United States Patent and Trademark OfficeImage Credit: Ford, United States Patent and Trademark Office / Ford Auto News Ford Lincoln Technology keyless entry