1979 Ford Ranchero Original California Blue Plate Survivor on 2040-cars

Auto blog

2015 Saleen 302 Black Label Mustang unveiled with 730 horsepower

The last time Saleen made these pages it was to report that the firm was out of money. However, just before that announcement, the tuning specialist told us about the three Saleen 302 Mustangs it was developing at three levels - White Label, Yellow Label and Black Label, with those latter two trims to put out 640 horsepower and 565 pound-feet of torque. Well, the Black Label is here - don't let the California Sunset paint fool you - and it's more powerful than planned, with 730 hp and 600 lb-ft blasted out of a 5.0-liter Coyote V8 hooked up to a twin-screw supercharger. Saleen says it's the most powerful, refined, and advanced Mustang it has ever built. Keeping all that power on the road is the increase in downforce that comes from a body that's been extended one inch in front and two inches in the back, and the wing suspended over the decklid. The stock suspension is refitted with Saleen S4 springs, shocks, swaybars and bushings, and the 20-inch wheels on 275-section rubber hide 15-inch dimpled rotors. The interior gets the requisite frills in leather and contrasting stitches, as well as new gauges and badging. It'll take $73,214 to open the door, but just $2,015 to put down a deposit. For more info, check out the press release below. Related Video: 2015 Saleen 302 Black Label Mustang March 15, 2015 -- Earlier this year, Saleen Automotive released their 2015 White and Yellow Label 302 Mustangs to much fanfare. To round out their fleet, Saleen pulled out all the stops and developed one of the best Mustangs to date. This car is set to change the way pony cars are looked at from here on out. At a one-of-a-kind event in Downtown LA, Saleen raised the curtain on the latest pony car out of their Corona, CA headquarters. "Since I started building cars in 1984 my goal has always been to go above and beyond where anybody has been before", said Steve Saleen. "This will by far be the most refined and advanced Mustang we have built to date." With over 30 years of experience in both racing and manufacturing vehicles, it was only a matter of time before Saleen built a Mustang as comprehensive and technologically advanced as the 2015 302 Black Label. Power Saleen combined the reliability and potency of the 5.0L Coyote motor with a twin-screw supercharger. The pair produces the most power from a production Mustang yet at 730 horsepower and 600 lb-ft of torque on 91 octane gas.

Malcolm Gladwell reflects on engineering, recalls, and compromise

Journalist Malcolm Gladwell has made a career taking on big, complicated topics and humanizing them to make the unwieldy understandable. He has already done this in bestsellers like The Tipping Point and Outliers, and now he has brought the same approach to automotive recalls in a long piece for The New Yorker. The article titled The Engineer's Lament is framed around an interview with the former head of Ford's recall office about the famous Ford Pinto campaign where the position of the compact's fuel tank could cause it to explode in rear-end collisions. Plus, there are detours into Toyota's unintended acceleration cases and the General Motors ignition switch problem. While all the history is illuminating, the heart of the story comes from an examination at the thought process of engineers, and how their thinking differs from other professions. Gladwell comes off as sympathetic to auto engineers in this piece. While he admits that they often approach problems in a sterile way, the writer doesn't try point that out as a failing. It's merely a fact to be understood. The story itself is quite lengthy, but well worth a read if you have the time for an insiders view into how these recalls are assessed on the inside.

Ford to add more than 2,000 jobs in Kansas City

Continued high demand for the Ford F-150, along with the addition of the all-new Transit series of commercial vehicles, has led Ford to announce that it will add over 2,000 jobs at its Kansas City Assembly Plant. At the time of the announcement, the plant boasts 2,450 hourly employees working on two shifts. All told, Ford will invest $1.1 billion in the Kansas City plant to expand truck production and begin producing the Transit series.
According to the automaker, fullsize truck sales are up 19 percent through April of 2013, leading to an additional 900 workers and a third shift of production for the F-150. Production of the Transit series will begin in the fourth quarter of this year, requiring an additional 1,100 workers. In addition, Ford estimates that a total of 18,000 jobs will be created by suppliers to its Kansas City plant to support the additional vehicle production.
Want to know more? Scroll down for the complete press release.