2012 V10 Supertruck Loaded And Ready To Pull......... No Reserve on 2040-cars

Auto blog

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video:

eBay Find Of The Day: 1988 Saleen Ford Mustang General Tire 21R race car

Saleen may be making headlines these days for working on the Tesla Model S, but its history and bread-and-butter is all about the Ford Mustang. The rear-wheel-drive Dearborn pony cars singlehandedly put the company on the map in the '80s. Founder Steve Saleen was already a talented American racing driver when he started the venture, and like many auto industry businesses before him, Saleen went to the track to prove his vehicles' worth. Now, there's a chance to buy one of those early racers on eBay Motors.
Saleen Mustangs raced in the Sports Car Club of America Escort Endurance Championship - a series of multi-hour races meant to challenge man and machine. Ostensibly a showroom stock class, the cars had larger wheels, tuned suspensions and other upgrades that stretched the concept slightly. Saleen found major success though, taking the championship for its class in 1987 and winning the 24 Hours of Mosport consecutively from 1986 through 1988.
According to the seller, Saleen only built eight of these cars, and this one carries the #21R serial number. They all started life as new Mustangs from Ford dealers but were immediately stripped and prepped to go racing. Beyond obvious mods like a roll cage, they featured eight-inch wide wheels in front, an inch of additional track width, stiffer suspension bushings and much more.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.