2008 Ford Xlt on 2040-cars

Auto blog

Ford and Lincoln recall roundup: Explorer, F-350 Super Duty, Aviator

Ford and Lincoln released information on a flurry of recalls this morning. There are three in total, and they span different models and separate issues. Those models include the 2013-17 Ford Explorer, 2020-21 Lincoln Aviator and 2020-21 Ford F-350 Super Duty. We’ll organize these three in order of most cars recalled. 2013-17 Ford Explorer This recall includes a substantial 774,696 vehicles, of which 676,152 are in North America. Why? Ford says these vehicles “may experience a seized cross-axis ball joint that may cause a fractured rear suspension toe link.” The diminished steering control that would follow could increase the likelihood of a crash, Ford states. Only vehicles that spent time in high corrosion states should be affected, Ford says. That means places that lay salt down, experience cold weather and high humidity. Owners of these vehicles will need to take their car into the dealership, where it will be inspected to determine if it needs work. If so, Ford will replace the cross-axis ball joint/knuckle, then replace the toe links with a newly-designed part. Notifications to owners of these vehicles are scheduled to be sent out the week of August 23.  WeÂ’ll note that Ford is reporting six “allegations of injury” related to this issue. For those who donÂ’t live in the high-corrosion states/their car was never registered in those states, Ford is offering a customer satisfaction program in case you were interested in having the work done anyway. 2020-21 Lincoln Aviator Lincoln is pulling back 40,995 new Aviators due to an improperly secured battery cable wire harness. This recall applies to gasoline-only versions of the Aviator, so Grand Touring PHEV buyers neednÂ’t worry. The wire harness may contact the AC compressor pulley due to it being secured improperly. Ford says that over time, the pulley could rub through the wire harnessÂ’ insulation, resulting in a short circuit and ultimately a fire. However, Ford is not currently aware of any injuries or fires related to this concern as of now. When you bring your car in, the dealer will inspect all the parts to determine what needs to be done. Fixes range from a basic tie strap to keep the harness away from the pulley (if it hasnÂ’t made contact yet), to replacement of the wire harness and AC belt if the contact has caused damage. Owners should expect to be notified the week of July 30 if their Aviator is involved in the recall.

The big dune jump and the damage done

The Silver Lake sand dunes see their fair share of well-built trophy trucks executing impressive jumps. Drivers build insane pieces of machinery for the express purpose of sailing through the air like mad men and women.
Mike Higgins is no stranger to the area. His heavily modified Ford trophy truck has gone flying through the sky on more than one occasion, but he recently bit off more than he could chew. After hitting a particularly lofty dune, Higgins went airborne for a ridiculous 180 feet before becoming intimately familiar with the finer points of gravity.
While Higgins nailed the jump, his landing fell short of wowing the judges. The impact very nearly broke his truck in two. Despite the mechanical mayhem, the driver walked away without a scratch, proving that occasionally miracles really do happen. You can check out the jump and the subsequent destruction below for yourself. Be warned: there's a fair bit of foul language.

Ford will put solid axles under the Bronco as the off-roading gods intended

We've been wondering what sort of creature the Bronco would be since we first heard of the thing last October, when a union chairman spilled the beans on the SUV and the Ranger pickup. Ford confirmed a 2020 arrival date for the Bronco at the 2017 Detroit Auto Show, but at that point pretty much all we were sure of was that the Ranger and Bronco would be returning. The open question would be how hungry Ford was to spoil the Jeep Wrangler's solo party as a compact(ish) off-roader with dual solid axles, since the easiest thing would be to carry over the suspension design of the presumably related international Ford Ranger and its Everest SUV version: independent front suspension with either a leaf- (Ranger) or coil-suspended (Everest) solid rear axle. Enter Dana, the long-time supplier of Jeep stick axles, to confirm that the 2020 Bronco is getting a pair of them. That means solid axles front and rear, just like under a Wrangler. So reports Automotive News, citing an investor presentation from Dana. All signs so far, such as the report that the Bronco would be engineered by the same team in Australia that created the Ranger pickup, indicated that the Bronco would share a platform with the Ranger and thus be body-on-frame. The solid axle confirmation essentially confirms that theory. Some off-road-capable vehicles have paired solid axles with unibody frames, like the Jeep Cherokee (XJ generation) and Grand Cherokee (ZJ and WJ generations), but they are outliers. Generally, if you've got solid axles at both ends, they're going in a vehicle with a ladder frame. It also lends credence to the notion that our Bronco won't simply be an imported Everest, which might be too understated to stand out from lesser crossovers anyways. This is good news if you have Blue Oval in your blood and pine for a modern SUV that'll show up the Jeep guys on the trail. Less directly, it could mean a wholesale assault on the formula that makes Jeeps successful in the first place: the massive aftermarket of off-roading equipment and dress-up bits that appeal to Jeep buyers almost as much as a Trail Rated badge. At a minimum, Bronco enthusiasts can breathe easy that the reborn SUV won't merely be a light-duty crossover with styling "inspired" by true off-roaders. There's still a lot left to learn about the Bronco. Keep up to date with our running summary of everything we know about the returning off-roader.