1966 Ford Ecoline Pickup With Quarter Windows on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ford GT, Buick Avenir and Audi Q7 take 2015 EyesOn Design awards

The annual EyesOn Design Awards at the Detroit Auto Show allows some of the greatest designers in the world to weigh in on the best production and concept debuts at the big event each year. For 2015, the large panel of judges included luminaries like Frank Stephenson of McLaren, Ralph Gilles from FCA and Moray Callum of Ford. Apparently the editors at Autoblog had a good eye because the winner of 2015's Best Designed Production Vehicle award went to the Ford GT, which was also our favorite debut from the show. The new supercar beat the Acura NSX and Mercedes-Benz GLE-Class Coupe for the honor. The judges described the Blue Oval's shape as "capturing the original GT40 in a modern interpretation," according to EyesOn Design. The Buick Avenir was also a big winner in the awards this year and received the nods for both Best Designed Concept Vehicle and Innovative Use of Color, Graphics and Materials. In the concept category, it beat out the Chevrolet Bolt and Mercedes-Benz F 015, and in the latter group, the sedan triumphed over Audi Q7, Mercedes F 015 and Volkswagen Cross Coupe GTE. The Q7 received its own accolade for Best Designed Interior, and it beat the Avenir and Infiniti Q60 for the honor. This year's Lifetime Design Achievement Award went to former Renault designer Patrick le Quement, and Bob Lutz received the EyesOn Design Catalyst Award for the second time. The honor is for an executive "who has empowered great design," according to the organization, which describes Lutz perfectly. Scroll down to read the announcement with more comments about the winners. Related Video: Ford, Buick, Audi recipients of EyesOn Design Awards at North American International Auto Show EyesOn Design Awards for Design Excellence for 2015 were revealed today at the North American International Auto Show. The awards honor the most significant automotive designs revealed at NAIAS as determined by the North American and global leaders of design from automotive manufacturers, along with academic chairs of transportation design programs and design leaders from other fields.

For thousands of US auto workers, the downturn is already here

LORDSTOWN, Ohio - Wall Street is fretting that the auto industry is heading for a downturn, but for thousands of workers at General Motors factories in the United States, the hard times are already here. Matt Streb, 36, was one of 1,200 workers laid off on Jan. 20 - inauguration day for President Donald Trump - when GM canceled the third shift at its Lordstown small-car factory here. Sales of the Chevrolet Cruze sedan, the only vehicle the plant makes, have nosedived as consumers switch to SUVs and pickup trucks. Streb is looking for another job, but employers are wary because they assume he will quit whenever GM calls him back. "I get it," said Streb, who has a degree in communications, "but it's frustrating." Layoffs at Lordstown and other auto plants point to a broader challenge for the economy in Midwestern manufacturing states and for the Trump administration. "This is about economics, not what Trump says. Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." The auto industry's boom from 2010 through last year was a major driver for manufacturing job creation. The fading of that boom threatens prospects for US industrial output and job creation that were central to Trump's victory in Ohio and other manufacturing states. "This is about economics, not what Trump says," said Robert Morales, president of United Auto Workers (UAW) union Local 1714, which represents workers at GM's stamping plant at Lordstown. "Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." Last week the Federal Reserve said factory output fell 0.4 percent in May, the second decline in three months, due partly to a 2 percent drop in motor vehicles and parts production. Mark Muro, a senior fellow at the Brookings Institution, has compiled data from government sources that show the auto industry punching higher than its weight in job creation in recent years - accounting for between 60 percent and 80 percent of all US manufacturing jobs added in 2015 and 2016. In the first quarter of this year, the auto industry accounted for less than 2 percent of the 45,000 manufacturing jobs created. "There's no argument with the idea that auto has been pulling the manufacturing sled up the mountain for the last three or four years," Muro said.