2013 Ford Mustang on 2040-cars

Auto blog

Ford and Lincoln recall about 170,000 vehicles over defective rear-view camera

Ford and Lincoln have jointly issued a safety recall that includes nearly 170,000 vans and SUVs built between the 2018 and 2023 model years. The vehicles included in the campaign are equipped with a rear-view camera whose image can cut out while the driver is backing up. Assigned recall number 23V-598 by the National Highway Traffic Safety Administration (NHTSA), the campaign includes the following cars: 7,649 units of the 2020-2023 Aviator fitted with the standard rear-view camera and built from October 19, 2019, to August 17, 2023. 70,600 units of the 2018-2021 Navigator fitted with the 360-degree camera and built from March 16, 2017, to December 23, 2021. 66,740 units of the 2022-2023 Transit fitted with either camera system and built from February 26, 2021, to August 17, 2023. 24,468 units of the 2021 Bronco fitted with the 360-degree camera and built from September 23, 2020, to December 22, 2021. Ford explains that the defect is present in all of the 169,277 vehicles included in the campaign. While these are different cars equipped with different technology, they all suffer from the same problem. The company explains that "customers may intermittently experience either a rear camera blue image or a full blue or black image on the SYNC [infotainment system] screen when the vehicle is placed in reverse, or when the 360-degree view is selected and available." It adds that losing the camera's image while backing up increases the risk of the crash. The cause of the problem varies from model to model. Ford has narrowed it down to the camera hardware, the wiring retention, and the Image Processing Module - V (IPMB) software. It adds that "fretting corrosion causes tin oxide formation on the internal camera connector due to [a] thermally-induced micro-movement between the tin-plated contact surfaces," and that the rate of tin oxide accumulation depends on factors such as the temperature and the humidity. It has also traced some of these issues to a problem during the manufacturing process. Ford will begin notifying owners of affected vehicles by mail on October 2. When parts are available, owners will be asked to bring their van or SUV to an authorized dealer so that a technician can replace the rear-view camera. Transit models included in the campaign will also receive a software update. Owners who have already paid to fix the problem can claim a reimbursement until June 30, 2024. This isn't Ford's first rear-view camera-related recall.

Ford shutters Genk assembly plant in Belgium

Ford has become the latest automaker to close one of its European assembly plants. The facility in question is located in the Belgian city of Genk and has been in operation since the early '60s when it started building the Taunus, Ford's first mass-produced, front-drive model. As part of the plan first announced over two years ago, the Genk Body & Assembly Plant is now closing its doors after half a century in the business and over fourteen million vehicles built. Although the plant itself employed some 5,000 workers, once you take into account the suppliers built up around the plant, the overall impact on employment in the area edges closer to 12,000. Genk Body & Assembly had until recently been tasked with producing the Mondeo sedan (which in its current iteration we know as the Fusion) as well as the S-Max and Galaxy minivans. Production of the Mondeo shifted in 2013 to the company's plant in Valencia, Spain, which also handles the Kuga crossover and Transit Connect cargo van, and will soon take over the minivans from Genk as well. The move follows a similar decision undertaken by General Motors to close the Opelwerk plant in Bochum, Germany. It also reflects a scaling down of automobile production in Belgium specifically: although Audi still manufacturers in Brussels and and Volvo in Ghent, Opel closed its plant in Antwerp in 2000 and Renault ceased production in Vilvoorde back in '97. However Ford still maintains its famous proving ground half an hour to the north in Lommel, Belgium. News Source: AutovisieImage Credit: Kristof Van Accom / AFP / Getty Plants/Manufacturing Ford plant ford s-max ford galaxy

Driving the 2021 Genesis G80 and Toyota Sienna | Autoblog Podcast #652

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder. They kick things off by talking about driving the all-new, 2021 Toyota Sienna hybrid minivan and Genesis G80 luxury sedan. Next, they talk about what of GM vehicles Autoblog staff members would like to restomod with the new Connect and Cruise eCrate motor and battery package. They also discuss the pros and cons of Ford CEO Jim Farley's decision to continue racing. Finally, they reach into the mailbag and help a listener pick a new car to replace a 2016 Mazda Miata. Autoblog Podcast #652 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving 2021 Toyota Sienna 2021 Genesis G80 We really want to use an eCrate to restomod an old GM car. Here's what we'd build Jim Farley allowed to continue racing his 1966 GT40 even as Ford CEO Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: