1999 Ford Mustang Gt With Terminator Engine Swap on 2040-cars

Auto blog

From Expedition to Navigator: our predictions for Lincoln's SUV

In the midst of all the buzz surrounding the new aluminum Ford Expedition and Expedition Max, we remembered the other large SUV the Ford Motor Company showed last year, the Lincoln Navigator concept. And since the Navigator has historically been built on the Expedition platform, we figured there's no better time to focus some of our predictions for the big Lincoln. First off, let's take a look at design. Having seen the new Expedition, we're fairly confident that the Navigator will look almost exactly like its concept. The strong similarities between two mean the Expedition serves as a preview of what a production Navigator will look like. For example, both vehicles' greenhouses we can see that the shape of the C-pillars are nearly identical. The only difference is that the Expedition's are painted body color, while the Navigator's are painted black. Additionally, the character line running along the top of the doors on both vehicles is roughly the same height. The same goes for the more subtle crease near the bottom of the doors. We also see no reason why Lincoln wouldn't use the full width taillights, fender vent, and grille treatment it used on the concept. Those are all easy design changes to create differentiation, and they're all right inline with the cues set by the Continental. View 15 Photos For powertrain, we're pretty certain the 400-horsepower 3.5-liter EcoBoost V6 previewed on the concept is a certainty now. The Expedition and Expedition Max will be offered with a 3.5-liter EcoBoost as well, so we know it will fit. We expect the Expedition's engine will produce 375 horsepower and 470 lb-ft of torque as it does in the F-150. That's less power than the Navigator concept, but it would be reasonable to make the production Navigator a bit more powerful than its lowly Ford brethren to help justify the increased price tag. Towing capacity will probably be about the same between the Ford and Lincoln, which should be something over 9,000 pounds. The Navigator will probably use the same two-wheel-drive and all-wheel-drive drivetrains, too. Inside is where the Expedition and Navigator will likely differ the most, particularly in seating. The Expedition offers seating for up to eight with an available second-row bench seat, and the Navigator concept had captain's chairs for every row. We're expecting the Navigator will only offer second-row captain's chairs since the cramped third row would be a waste of nice buckets.

Mustang, Camaro, Challenger gallop onto USPS pony car postage stamp set

Some of America's most iconic cars are about to be immortalized on postage stamps. A new set by the U.S. Postal Service will celebrate the the golden era of pony cars, featuring five classic examples of Detroit iron. Each one is beautifully illustrated in oil-on-canvas style, with subjects in motion and sunlight glinting off the chrome, and would add a nice touch to any first-class letter. The pony car segment was all about (relatively) small, sporty alternatives to the full-size land yachts of the 1960s. They typically came equipped with 6-cylinder engines or small-block V8s. The category was named after the Ford Mustang, hence  the name. Some, though, argue that the Plymouth Barracuda, which was launched a couple of weeks before the Mustang, is the first. Luckily, the Falcon-based Mustang's distinct styling generated a sales sensation, or we might be calling them fish cars. Appropriately, one of the featured cars is a Mustang. But it's not just any Mustang. The 1969 Boss 302, seen here resplendent in Bright Yellow, was created for the hotly-contested SCCA Trans-Am racing series. One of its main rivals would have been the 1969 Chevy Camaro Z/28, also created specifically for the series, and is included in the set in Fathom Green. Representing Auburn Hills in the set is a 1970 Dodge Challenger R/T in Plum Crazy, while Southfield's American Motors gets a nod with an AMC Javelin in Big Bad Orange. The Mustang's platform cousin, a 1967 Mercury Cougar XR-7, is portrayed in a gorgeous Burgundy Poly that almost looks incomplete without Neko Case on the hood. It's not the first time the USPS has honored America's rich car culture on its stamps. In 2013, it issues a series of muscle car stamps with the help of Richard Petty. That set featured a 1966 Pontiac GTO, 1967 Shelby GT-500, 1970 Chevelle SS, 1970 Plymouth Hemi ’Cuda and, of course, a 1969 Dodge Charger Daytona. Another set in 2016 featured classic pickup trucks. Going further back, a 2008 release had chroed and finned automobiles of the 1950s and a 2005 release featured sporty American cars of the same era. The pony car stamps will debut on August 25 at the Great American Stamp Show in Sacramento, California in partnership with the American Philatelic Society. The public is free to attend the dedication ceremony, but you must RSVP first. After that, they will be available at local post offices and on line at the USPS store.

Now you can 3D print your favorite new Ford

Ford is letting people build their own cars, offering digital files so people can print 3D versions of their favorite models. This is way cooler than any old Matchbox or Hot Wheels toy. Ford this week started offering printable files for the F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST. Folks can order the 3D models in 1:32 scale in plastic (that'd make the mighty large pickup truck about eight inches long) but the digital files let users tweak the scale to the their liking. Once people have the digital files, they can print out their own miniature versions of the cars, made out of soft plastics, sandstone, and even some metals. Ford says it expects demand for such files to grow as sales numbers for desktop 3D printers surges to 1 million units in 2018. That's up from about 44,000 last year. Ford already offers digital files for its company logo, the 1.0-liter engine block, and two older Mustang models. But these new models take this to a totally different scale. Check out Ford's press release below. PRINT YOUR FAVORITE FORD VEHICLE AT HOME: FORD FIRST AUTOMAKER TO OPEN ONE-STOP 3D SHOP ONLINE - Consumers can now download digital images and 3D-printable files of Ford vehicles at the first-ever automaker-licensed, one-stop 3D shop online - The Ford 3D Store offers printable files of F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST; more models will become available later - Online store is powered by TurboSquid.com, the leader in providing automotive digital imaging and 3D-printable files Want to 3D-print a Shelby GT350R at home? Or would you prefer to simply purchase an F-150 Raptor 3D digital image for a presentation? How about both? Ford fans can now download digital images for Ford vehicles at the first-ever, automaker-authorized one-stop online store for 3D-printable vehicle files. The Ford 3D Store, 3d.ford.com, allows customers to use advanced technology to make their own models of Ford vehicles of the size and material they desire, or simply opt to purchase a 3D digital file from a growing library of more than 1,000 Ford images. "3D printing at home is a growing trend, and it makes sense for us to offer our customers a chance to make their own 3D Ford models," said Mark Bentley, licensing manager, Ford Global Brand Licensing.