1970 Ford Mustang Boss 302 on 2040-cars

Auto blog

Ford starting up 2.0L EcoBoost engine production in Ohio

Joe Hinrichs, Ford's President of The Americas (pictured above), announced today that in late 2014, the automaker will be building the 2.0-liter EcoBoost four-cylinder at its Cleveland Engine Plant, a move requiring a $200-million investment and the hiring of 450 new employees. European-built Ford products will continue to source this engine from the Valencia, Spain plant where all of these EcoBoost four-cylinder engines are currently built, and the new Cleveland engines will be used for all North American-made models.
Ford is planning to build its popular EcoBoost engines regionally to maximize production capacity and meet customer demand. Last year, Ford sold 334,364 vehicles with EcoBoost engines in the US alone, and that number is expected to swell to more than 500,000 by the end of this year, with global sales expected to total 1.6 million. By 2015, Ford says that 95 percent of its nameplates will offer an EcoBoost engine.
One such vehicle that could be adding an EcoBoost engine, according to Automotive News, is none other than the 2015 Ford Mustang. The report says that Ford could use either the 2.0-liter EcoBoost or an upcoming 2.3-liter EcoBoost in the sixth-generation pony car.

Should reflective paint earn automakers EPA credits?

No matter where you look around the world, governments are cracking down on vehicle emissions and aiming for higher fuel economy standards. Generally, automakers are pushing back against the increased regulation, and in the US, General Motors, Ford, and FCA US are looking for new compromises. The Big Three want to the EPA to grant them retroactive emissions credits for using tech that they claim reduces CO2 but not on the government agency's on-road testing. Among these technologies are things like reflective paint and glass, LED lights, ventilated seats, stop/start, and more efficient air conditioning compressors. Starting with the 2014 model year, the automakers can receive credits for a few grams per mile reductions on models with some of these solutions, according to Automotive News. However, the companies are also petitioning the EPA to make the credits apply to earlier vehicles with them, as well. The emissions advantages for systems like stop/start and less polluting AC refrigerants seem fairly obvious. For reflective paint and glass, the belief is that keeping a vehicle interior cooler should mean a lower need for air conditioning and therefore a decrease in CO2. Margo Oge, the former boss of the EPA's Office of Transportation Air Quality, told Automotive News these credits are part of the plan. "That's the whole point of what we tried to establish," she said. "We wanted companies to invest in and develop these technologies." The EPA wants vehicle emissions at the corporate average equivalent of 54.4 miles per gallon fuel economy by 2025, and so far that seems achievable. It will translate to less than 40 mpg on the EPA sticker. In a report last summer, the industry was about 10 grams per mile of CO2 better than the rules required, and that was solely based on 2012 model year vehicles. In an update for 2013, the companies were up to 12 grams per mile beyond targets. News Source: Automotive News - sub. req.Image Credit: Mark Humphrey / AP Photo Government/Legal Green Ford GM Emissions Fuel Efficiency FCA fca us

Fiat Panda by M-Sport a one-of-a-kind rally car

English racing and engineering firm M-Sport is probably best known for the Bentley Continental GT3 endurance racer and the Ford Fiesta R5 customer rally car. Since building the first of 294 Fiesta R5 Mk. I cars in 2013, the fleet of pint-sized competitors has won a total of more than 950 races. So when a longstanding M-Sport customer asked the company to do something special with a clapped-out, 1990s-era Fiat Panda that would retain the car's Panda-ness but also make it a stonking rally car, M-Sport decided to combine the Italian with the Anglo-American. The result is the Panda by M-Sport, a widened Panda bodyshell lowered atop a Fiesta R5 chassis and engine. Otherwise known as Panda'monium. Or Pandiesta, if you're tipsy. Just fitting the skinny Fiat over the tube-frame chassis meant widening the Panda's body shell by 14.2 inches; that slick grille is actually made of two Panda grilles to gain the required width. That surgery helps maintain the original Panda's silhouette, but more was needed to slide the Fiesta's wider track underneath. More latitudinal stretch was provided by the box-section wheel arches that, up front, flow into a front bumper that is half snowplow. In the longitudinal direction, the Pandiesta's wheelbase is 12.6 inches longer than that of the stock Panda. The Ford's 1.6-liter EcoBoost four-cylinder lives under the hood. It sends nearly 300 horsepower and 332 pound-feet of torque to four Pirelli P Zeros through a five-speed sequential transmission and two custom differentials. The new rear diffuser and single, central exhaust convey the seriousness of the endeavor. Hand-embossed lettering spells "PANDA 4x4" on the rear hatch in case anyone has questions about this having as much capability as the standard Panda 4x4. The interior is all Fiesta R5 save for the Panda-mimicking instrument panel and the co-driver's footrest. The latter is also inscribed with the word "PANDA." Despite the license plate, there's no question of street legality here, or rather illegality. M-Sport says the Panda'monium is ready to do any special stage on tarmac or gravel. Seems this is also the car that launches a new division for customer creations called MS-SV, which is M-Sport Special Vehicles. You can watch M-Sport owner Malcom Wilson take you on tour of the Panda by M-Sport in the video at top, and check out what the finished product can do on a track here.  Related Video: This content is hosted by a third party.