1967 Ford Mustang Convertible on 2040-cars

Auto blog

Ringbrothers drops more hints about its wild SEMA creations

Ringbrothers isn't finished teasing its SEMA creations. First we got a sliver of rear quarter on a 1969 Chevrolet Camaro that revealed a bundle of carbon fiber and SEMA-obligatory deep-dish wheels. The Wisconsin tuner's now announced its litter of cars headed to the show and a few specs, along with two shadowy drawings. The Camaro, christened with the name Valkyrja and a two-tone paint job, gets stretched in two directions with severe fender flares to widen the body and an extended wheelbase. We're not sure what's happening with the Camaro's snout in the drawing, but under that bulging hood we'll find a 416-cubic-inch LS V8 from Wegner Motorsports. Wegner built the 416-cu-in supercharged LS3 V8 that powered Ringbrothers' 1,000-hp G-Code Camaro in 2016.  The second member of the gang is a 1969 Ford Mustang Mach 1 dubbed Unkl. The exterior begs for attention with a deep blue sea paint job, deep front chin spoiler, bulging hood, yellow brake calipers, and what looks like a racing number inside a roundel on the doors. Unkl gets its motivation from a 520-cu-in Boss V8 built by Kaase Racing Engines, rumored to throw about 800 hp.    Finally, Ringbrothers is bringing its Cadillac Madam V for another Las Vegas go-round after giving the custom coupe some updates. The Madam V is a 1948 Cadillac Series 62 fastback coupe body placed atop an ATS-V chassis, first shown in 2016. The firm didn't elaborate on the changes, so all we can expect for now are the coupe's postwar good looks mixed with new-millennium engineering, and a 3.6-liter twin-turbo V6 with 464 hp under that exceptionally long hood.    For any in attendance at the show, the Valkyrja Camaro debuts at the BASF booth on Tuesday, Nov. 5, 2019 at 9:30 a.m., the Unkl Mustang gets revealed a couple hours later at the Flowmaster/Holley booth, and the Madam V Cadillac will be on display throughout the show at the Ringbrothers booth.

Ford readying Ranger-based Everest SUV?

Way back in August, we showed you a Ford concept for the Australian market called the Everest. Now, we can show you that work on the new Ranger-based SUV is well under way.
At this stage, it's still quite clearly a mule (note the misalignment of the front and rear doors), wearing the Ranger's front end and the rump of Ford's overseas Territory crossover. The wheelbase is shorter than a Ranger, according to our spy photographers, which strikes us as somewhat odd for a more passenger-oriented vehicle. Disc brakes should be fitted at all four corners, while the new SUV, which will almost certainly wear the Everest name, should sport a new rear suspension.
In terms of looks, we're expecting the Everest Concept to inform the appearance of the production model. Naturally, there will also be some interior tweaks, particularly around the dashboard, which is covered in these photos.

Rare Ford Mustang ASC McLaren is a piece of '80s history

You can't blame the dealer for advertising this oddball convertible as a "Ford Mustang McLaren." The name certainly rolls off the tongue better than "Ford Mustang ASC McLaren," and it makes the car sound a whole lot more appealing. However, without the 'ASC' in there, you don't get the full picture. And when it comes to the world of strange automotive collaborations—particularly those of the 80s—you most definitely want the full picture. ASC McLaren Mustangs were the result of fortuitous timing, and a project that was already underway between the American Sunroof Company and McLaren (no, not that McLaren). Detroit custom car builder Peter Muscat brought the idea of a Mustang with a tonneau cover to ASC after chopping the top off a Fox body on his own, and in turn ASC founder Heinz Pretcher brought the concept to Ford. Big blue was already in the midst of relaunching a Mustang convertible, which had been absent from the lineup for 10 years, so initially it was the Mercury Capri that got the ASC/McLaren treatment. The result was a car that was more expensive than a Mustang GT, and coupled with declining sales of the Capri overall, the car was discontinued in 1986, paving the way for the ASC McLaren Mustang you see here on eBay. With the change over to the Mustang as their platform for modification in 1987, ASC McLaren were given the opportunity to create something notable. Customizing the Capri was one thing, but the Mustang name carries with it iconic status. So what did ASC McLaren do with their chance to leave their mark on automotive history? They gave the car some visual modifications, both inside and out, but like the Capri, left the powertrain untouched. Also like the Capri, the cars still ended up costing more than $20,000. Between the high price, the economic woes of the late 80s, and disputes between Muscat and Pretcher, the ASC McLaren Mustangs were no more by 1990. During the three year run, 1,806 ASC McLaren conversions were completed, making them quite rare, especially low mileage examples like this one. The 5.0 V8s are known for being stout engines, capable of handling serious modification, and logging lots of miles, so there are no concerns there. The 5-speed Borg-Warner transmission that came in all Mustang GTs is also known for being a durable unit, the '87-'90 versions especially so. The main concern here would be the life the car has lived, and more importantly where it has lived.