Find or Sell Used Cars, Trucks, and SUVs in USA

1966 Ford Mustang Gt on 2040-cars

US $17,600.00
Year:1966 Mileage:5000 Color: Red /
 White
Location:

Oakhurst, Texas, United States

Oakhurst, Texas, United States
Advertising:

Please contact me at : hymanhvvantrease@ukcentre.com .

Mustang GT is lovingly owned by a local car collector. Stored in a climate controlled environment since undergoing
a complete rotisserie restoration from top to bottom. This car is like new. Everything rebuilt or new. If you are
interested in a 10 out 10 Mustang GT Coupe this exceptional car will not disappoint you.1966 Mustang Factory "A" Code GT Vin # 6R07A216726
This gorgeous Mustang GT under went a complete professional rotisserie Restoration.
"Like New, inside and out"
Exterior: Candy Apple Red, base coat/clear coat, excellent paint totally disassembled, see pictures
Engine: 298 Cu In, complete long block rebuild, number matching , holly 4 bl. carb.
Transmission: complete rebuild top loader 4 -Speed with a new clutch assembly.
Factory Air Conditioning: with a new Sanden compressor and all new hoses.
Differential: rebuilt with 3:00 gears. New Axle bearings and seals.
Suspension: all new, upper and lower ball joints, spring perchs, tie rod ends, idler arm, new sway bar, strut
bushings and new front and rear shocks.
Power Steering: rebuilt pump, control valve, P/S ram, steering box, all new P/S hoses.
Brake System: Rebuilt , New rotors, pads, calipers, new rear shoes, wheel cylinders.
Exhaust: all new factory GT exhaust system with trumpet tips
Interior: New Deluxe Pony Seats, door panels, carpet, dash pad, headliner Console has removable arm rest and cup
holders done in matching interior colors and material.
Sound System: Custom auto Sound system in original dash position, features AM/FM IPod MP3 compatible.
Instrumentation: all gauges work as they should including the Ralley Pac with Tachometer and clock
Tires: new radial tires ( better ride and handling) with dual red lines and factory Ralley wheels
Mustang GT Factory A Code VIN: 6R07A216726
Build Code 65B T F 3 15F 75 1 5
Original matching 289cu in 4 V engine
Engine Cast date code is "6E19" 1966 May 19
C5AE-6015E
Engine Assembly date code is "6E23C" 1966 May 23
Body assembly Code is "15F 1966 May 15
6 1966
R San Jose CA
07 Hardtop
A 289 cu in 4V engine
65B Body: Hard Top
T Color Candy Apple Red
F3 Interior Type Parchment, with Burgundy Luxury
15F Build Date June 15, 1966
75 DSO location Phoenix AZ
1 Axle type 3:00 to 1 ratio
5 Transmission 4 speed manual
Total Rotisserie Restoration on this 66 GT Mustang. Everything works as it should, drives great, looks great, no
disappointments.

Auto Services in Texas

Zepco ★★★★★

Automobile Parts & Supplies, Speedometers, Truck Equipment, Parts & Accessories-Wholesale & Manufacturers
Address: 508 N Central Expy, Murphy
Phone: (972) 690-1052

Z Max Auto ★★★★★

Auto Repair & Service, Used Car Dealers
Address: 1705 W Division St, Arlington
Phone: (817) 460-3555

Young`s Trailer Sales ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Trailer Hitches
Address: 11th, Gruver
Phone: (806) 374-8171

Woodys Auto Repair ★★★★★

Auto Repair & Service
Address: 6106 N Dixie Blvd, Gardendale
Phone: (432) 362-1669

Window Magic ★★★★★

Auto Repair & Service
Address: Hockley
Phone: (281) 362-0640

Wichita Alignment & Brake ★★★★★

Auto Repair & Service, Brake Repair, Wheels-Aligning & Balancing
Address: 1200 31st St, Holliday
Phone: (940) 322-1919

Auto blog

A cool boost to turbocharger performance

Fri, Jul 17 2015

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ford F-Series Super Duty earns Truck of Texas award

Wed, Oct 12 2016

Texans love their pickup trucks, which you already knew. That means the Texas Auto Writers Association and its "Truck of Texas" award is a big deal. And the latest trophy goes to the 2017 Ford F-Series Super Duty. The pickup truck managed to snag TAWA's award at the 2016 Texas Truck Rodeo. The award marks the 13th time Ford's F-Series has been named the pickup king of the Lone Star State. Roughly 70 journalists converged outside at the Longhorn River Ranch, just outside of Austin, TX, for the 23rd annual Texas Truck Rodeo where a host of Ford's vehicles won awards. In addition to the F-Series Super Duty being named the "Truck of Texas," the 2017 Ford Super Duty won the Heavy Duty Pickup Truck award, while the 2017 Ford F-150 with the 3.5-liter EcoBoost V6 engine won the Best Powertrain award. The journalists also awarded Ford for having the "Truck Line of Texas." Ford wasn't the only winner at the Texas Truck Rodeo, as Nissan brought home five awards, including one for the 2017 Titan in the fullsize pickup category and one for the Armada in the SUV segment. Ram also won a few accolades with its trucks. The 2017 Ram 1500 won for being the most luxurious pickup truck, while the 2017 Ram 2500 Power Wagon won the off-road pickup truck award. Last year, TAWA named the 2016 Nissan Titan XD the Truck of Texas, but Ford's all-new F-Series Super Duty managed to keep the Japanese automaker's full-size offering at bay. For the 2017 model, Ford placed aluminum body panels into the F-Series Super Duty's body, which not only shed weight, but also make the truck stronger. Scroll down to see the entire list of TAWA's winners from the 2016 Texas Truck Rodeo. Truck of Texas: 2017 Ford Super Duty SUV of Texas: 2017 Nissan Armada CUV of Texas: 2017 Volvo XC90 Truck line of Texas: Ford Motor Co.

Mulally confirms he's not leaving Ford for Microsoft

Tue, 07 Jan 2014

In recent months, rumors had been flying about Ford CEO Alan Mulally potentially leaving the company to take a position at Microsoft. Last we heard, Mulally was planning to stick around at Ford through at least 2014, and in an interview today, that bit was confirmed by the CEO himself.
According to the Associated Press, in a report from The Detroit News, Mulally said he will not be leaving Ford for Microsoft, and reiterated that he will remain at the Blue Oval through 2014, if not longer. Mulally has "no plans other than to serve Ford," according to the report.
Mulally did not say whether or not he had been in talks with Microsoft at any point. Microsoft CEO Steve Ballmer has said he plans to leave the software company sometime this year.