1966 Ford Mustang 302 Engine on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Radical RXC is a Mustang-hearted racecar for the road

Radical has been building fantastic open-cockpit racers and roadcars for years, for the track day enthusiast who wants a vehicle that looks like it could show up for a start at the 24 Hours of Le Mans. The company's latest creation is the RXC, and while this coupe looks like a prototype racer, it's road legal in the UK and in some parts of the US. When testing a car this, um, radical, the first thought is likely to get it to the track for some big slides and wide open acceleration, but XCar Films takes the opposite approach in its latest video to learn how this racer fares on public roads. The version tested here is the standard RXC with the 3.7-liter V6 out of the Ford Mustang tuned to 350 horsepower with a seven-speed sequential gearbox; but Radical also offers the same engine with 380-hp, a 454-hp Ford EcoBoost 3.5-liter twin-turbo V6, or even a 500-hp V8. Even in the most basic guise, it's a handful to control in the wet, if this video is any indication. The cliche of a road-legal racecar is bandied around a lot in the motoring world, but it truly applies to the RXC. The only problem with seeing the RXC exclusively on the road is that it can never really open up and show its full potential. This racer is indeed chomping at the bit to rocket off into the horizon, but all those pesky road safety laws hold it back. Still, the video is a chance to get a better impression about this thoroughbred sports car. Scroll down to check it out. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

How Ford plans to handle insurance and repair questions surrounding new aluminum-bodied F-150

Building a car out of aluminum has a number of benefits - the lighter weight allows the vehicle to be more agile, more fuel efficient, make better use of its power and be more resistant to dings and dents. The downside to the advanced construction, though, is that repairs are both challenging and expensive. That's troubling for the new, aluminum-bodied Ford F-150, because it's kind of made a name for itself as a rugged, durable work vehicle.
How will the legions of Ford buyers cope when it comes time to insure and repair their new trucks? Well, according to Ford, it's expecting a ten-percent jump in insurance costs for the aluminum-bodied F-150, although Ford's truck marketing manager, Doug Scott, was quick to point out that the F-150 is generally cheaper to insure than its competition from Ram and General Motors. "At the end of the day, that's sort of a wash," Scott told Automotive News at last week's Detroit Auto Show. "We've spent a lot of time and feel very comfortable that that's not going to be an inhibitor."
The other issue facing Ford is the distinct lack of body shops that have the training or equipment to repair aluminum-bodied vehicles. AN cites an estimate from the Automotive Service Association claiming that of the 30,000 independent body shops in the US, less than 10 percent are able to work on aluminum.