1965 Ford Mustang Coupe Project California Rust Free Body (factory 289, Stick) on 2040-cars
Wonewoc, Wisconsin, United States
Body Type:Coupe
Engine:289 2V
Vehicle Title:Salvage
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Model: Mustang
Trim: Standard
Drive Type: Rear Wheel Drive
Mileage: 139,548
Exterior Color: Blue
Disability Equipped: No
Interior Color: Black
Today up for bids is a extremely rust free 1965 Ford Mustang Coupe. This car was originally from the California/Washington state area. It must have did some drag racing back in the day because there are slapper bars and a cutout in the transmission tunnel for an aftermarket shifter. The car originally was a 289 2V stick. I cannot verify if it was a 4 speed or 3 speed because the door tag is missing. As you can see in the pictures the car is very solid. All frame rails, floor pans, aprons and even the trunk dropoffs are very solid with no rot. All the extra pieces shown in the photos are included with the sale of the car. This would make a great starting point for your Mustang Restomod project. There is no title included with the sale of the car. It has not been junked but you will need to contact a title service. The car is located in Wonewoc, WI, which is about 50 miles north of Madison. I also have 2 other 1965 Mustangs (1 4speed Coupe, 1 Fastback) on ebay currently for sale. Thanks for looking and good luck bidding!
Ford Mustang for Sale
Auto Services in Wisconsin
Todd`s Automtv ★★★★★
Sturtevant Auto ★★★★★
Stephan`s Auto Repair ★★★★★
State Auto Sales ★★★★★
Scott`s Towing & Recovery ★★★★★
Schmelz Countryside Volkswagen/Saab Car Sales ★★★★★
Auto blog
2015 Ford Focus
Tue, 14 Oct 2014Sitting down at the pre-drive briefing with Ford engineers ahead of sampling the refreshed 2015 Focus, water bottles clinked as we wet our whistles before Q&A. While pouring a glass, we noticed something stamped on the bottle label: "1L." One liter. We were palming the exact displacement of the EcoBoost engine our group was about to drive. This was undoubtedly coincidence (such bottles litter every conference and dinner table in Europe) but it served to drive home just how small the total swept volume of Ford's wunderkind powerplant really is. It's tiny.
Of course, this isn't our first run-in with the little triple - we've sampled its turbocharged charms before in Ford's smaller Fiesta. At that time, we found it had plenty of poke for the subcompact, but the larger C-segment Focus carries around another 450 pounds or so and pushes a wider profile through the air. Would the three-cylinder have the stuffing to make the most of the Focus' athletic chassis, or would it be a letdown? Would it be the same as it was when we tested it in a Euro-spec Focus a couple of years ago? There was nothing left for it but to head out on the bucolic roads surrounding Versailles the day after the Paris Motor Show and find out for ourselves.
Here's why automakers roll out those Texas-themed pickup trucks
Thu, Sep 29 2016Every year, automakers with a full-size truck link make a big show of the Texas State Fair, usually involving a reveal of a new model. Sometimes they show a whole new truck, and other times a special edition centered on the Lone Star state. While some people might write this off as a quirk of the industry, others might be wondering, "What's the big deal with Texas?" As it turns out, part of the big deal with Texas is big truck sales. According to Dave Sullivan, product analysis manager at AutoPacific, Texas buys more trucks than any other state in the country. It's not a small margin either. Edmunds.com, one in five trucks sold in the US are sold in Texas. The state also accounts for 15 percent of the country's large truck sales, which is more than twice that of California, the second largest truck market in America. Even when you break down sales only in Texas, trucks are a huge piece of the pie - Sullivan says that a quarter of new vehicle sales in Texas are trucks. One in five trucks sold in the US are sold in Texas. But it's not just sales that make truck builders give attention to Texas. As Sullivan explained, "Pickups are life in Texas." Both he and Hugh Milne, marketing and advertising manager for the Chevy Silverado line, said that trucks are key fixtures in Texas society, as both work trucks and luxury vehicles (or Texas Cadillacs as Milne called them). Milne said Texas is so important in the truck market that if you want to be successful in the rest of the country, "you've got to be successful in Texas." As for the State Fair, it has become a prime location for reveals in part because of the importance of the Texas market and because of how big the fair is. Milne also revealed that the State Fair also hosts its own auto show, so it's an ideal venue for a vehicle introduction. So there you have it. Why do truck builders obsess over Texas? It's because Texas obsesses over trucks. When you have one market that loves your product that much, you give it the attention it deserves. Related Video: Image Credit: Donovan Reese via Getty Images Auto News Marketing/Advertising Chevrolet Ford RAM Truck f-150 texas state fair
NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels
Wed, May 27 2015The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video:





















2004 ford mustang gt convertible - no reserve! mach stereo - 40th anniversary
1994 mustang v6
2013 ford mustang steeda edition 3.7 ltr v6
1989 ford mustang lx 5.0 convertible fox body automatic performance parts
2002 ford mustang gt convertible supercharged
1966 mustang a code convertible