Find or Sell Used Cars, Trucks, and SUVs in USA

1926 1927 Ford Model T Coupe Hot Rod on 2040-cars

Year:1926 Mileage:2400 Color: Black /
  Black/Grey
Location:

Camas, Washington, United States

Camas, Washington, United States
Advertising:
Transmission:Automatic
Body Type:Coupe
Engine:350 CID CHEVY V8
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Condition:
Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ...
VIN (Vehicle Identification Number)
: ID008770
Year: 1926
Interior Color: Black/Grey
Make: Ford
Number of Cylinders: 8
Model: Model T
Trim: Ford Model T Coupe Hot Rod
Drive Type: RWD
Mileage: 2,400
Exterior Color: Black

1926 FORD MODEL T COUPE - HOT ROD / RETRO ROD Originally built in the early 1990's by an engineer/fabricator/drag racer and has been covered up in a garage in Idaho for about 15 years. I purchased it last October and spent the winter/spring & summer cleaning up the years of sitting in a garage. All steel body with black lacquer finish. 350 SB Chevy w/ Pink rods, Keith Black pistons, Isky camshaft, roller rockers, 671 Dyer blower, two Holley 600 cfm carburetors, Accel Pro Series dual point distributor, Turbo 400 trans in front of a 10 bolt rear-end with rear GM metric disc brakes. Very well built chassis with a 4" dropped front axle. Only 2400 miles on the car/motor!  I drove it to a few car shows & "cruise-ins" this summer, a real head turner! Needs better brakes...... only has rear disc brakes. Now it's time for a new owner to take it to the next level. Great start on a one of a kind show car / street rod or ??? Low reserve set for an immediate sale, I am downsizing and will not have room for this hot rod. Call or text me if you have any questions. This is the third time I have listed on eBay Motors......serious bidders only with cash in hand. I have had two winning bidders not follow through with the purchase. Thanks for looking........ 360-608-0863

 

This vehicle is being sold as is, where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle.

 

 

 

 

Auto Services in Washington

Wolfsburg Motorwerks ★★★★★

Auto Repair & Service, New Car Dealers
Address: 5010 14th Ave NW, Kingston
Phone: (206) 789-0182

Wise Chuck Motors ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 2707 SE 82nd Ave, Vancouver
Phone: (503) 777-3341

Three Lakes Automotive ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Brake Repair
Address: 5730 127th Ave SE, Granite-Falls
Phone: (360) 563-1232

Taylor Brake Service ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 630 Elliott Ave W, Rollingbay
Phone: (206) 284-8610

T V G Inc ★★★★★

Auto Repair & Service, Brake Repair
Address: 945 SE 12th Ave, Vancouver
Phone: (503) 239-0122

Superior Auto Body INC ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Dent Removal
Address: 1543 SE Orient Dr, Camas
Phone: (503) 666-6434

Auto blog

Ford Fiesta 1.0L EcoBoost sales robust in early going

Tue, 13 May 2014

Okay, okay, okay, so I was just a smidge wrong. Those that read my review of the Ford Fiesta with the new 1.0-liter, EcoBoost engine will know that while I really enjoyed the torquey little three-cylinder, I was concerned that Ford's decision to force 1.0-liter owners into a manual transmission, steel wheels and one trim level might hurt sales of the new engine. I was also concerned that the promised 45-mile-per-gallon highway rating wouldn't be enough to tempt buyers into trying an engine that's so far outside of what the general public is use to. My concerns, though, seem to have been for naught.
While not doing a booming business on the triple-equipped Fiesta, Ford is seeing a take rate of four to eight percent per month in the engine's first few months on sale. Now, four to eight percent might not sound like a lot - if, like last year, the Fiesta sells around 71,000 units, there'd be barely 5,600 1.0-liter models on the road. It is also small potatoes relative to the take rate on EcoBoost-equipped vehicles across the Ford range, which US sales analyst Erich Merkle estimates to be roughly 35 to 40 percent of retail sales. Still, according to The Detroit News, the 1.0-liter is getting adopted at roughly the same rate as the sparkling Fiesta ST, which should be a solid indication of just how well this little engine is doing.
The 1.0-liter's success "really speaks volumes, not just to what we're doing with the Fiesta, but with EcoBoost in general," Merkle told Autoblog.

Ford to add more than 2,000 jobs in Kansas City

Thu, 02 May 2013

Continued high demand for the Ford F-150, along with the addition of the all-new Transit series of commercial vehicles, has led Ford to announce that it will add over 2,000 jobs at its Kansas City Assembly Plant. At the time of the announcement, the plant boasts 2,450 hourly employees working on two shifts. All told, Ford will invest $1.1 billion in the Kansas City plant to expand truck production and begin producing the Transit series.
According to the automaker, fullsize truck sales are up 19 percent through April of 2013, leading to an additional 900 workers and a third shift of production for the F-150. Production of the Transit series will begin in the fourth quarter of this year, requiring an additional 1,100 workers. In addition, Ford estimates that a total of 18,000 jobs will be created by suppliers to its Kansas City plant to support the additional vehicle production.
Want to know more? Scroll down for the complete press release.

Rare Ford Mustang ASC McLaren is a piece of '80s history

Wed, Jun 1 2016

You can't blame the dealer for advertising this oddball convertible as a "Ford Mustang McLaren." The name certainly rolls off the tongue better than "Ford Mustang ASC McLaren," and it makes the car sound a whole lot more appealing. However, without the 'ASC' in there, you don't get the full picture. And when it comes to the world of strange automotive collaborations—particularly those of the 80s—you most definitely want the full picture. ASC McLaren Mustangs were the result of fortuitous timing, and a project that was already underway between the American Sunroof Company and McLaren (no, not that McLaren). Detroit custom car builder Peter Muscat brought the idea of a Mustang with a tonneau cover to ASC after chopping the top off a Fox body on his own, and in turn ASC founder Heinz Pretcher brought the concept to Ford. Big blue was already in the midst of relaunching a Mustang convertible, which had been absent from the lineup for 10 years, so initially it was the Mercury Capri that got the ASC/McLaren treatment. The result was a car that was more expensive than a Mustang GT, and coupled with declining sales of the Capri overall, the car was discontinued in 1986, paving the way for the ASC McLaren Mustang you see here on eBay. With the change over to the Mustang as their platform for modification in 1987, ASC McLaren were given the opportunity to create something notable. Customizing the Capri was one thing, but the Mustang name carries with it iconic status. So what did ASC McLaren do with their chance to leave their mark on automotive history? They gave the car some visual modifications, both inside and out, but like the Capri, left the powertrain untouched. Also like the Capri, the cars still ended up costing more than $20,000. Between the high price, the economic woes of the late 80s, and disputes between Muscat and Pretcher, the ASC McLaren Mustangs were no more by 1990. During the three year run, 1,806 ASC McLaren conversions were completed, making them quite rare, especially low mileage examples like this one. The 5.0 V8s are known for being stout engines, capable of handling serious modification, and logging lots of miles, so there are no concerns there. The 5-speed Borg-Warner transmission that came in all Mustang GTs is also known for being a durable unit, the '87-'90 versions especially so. The main concern here would be the life the car has lived, and more importantly where it has lived.