Find or Sell Used Cars, Trucks, and SUVs in USA

1923 Ford T-bucket For Sale on 2040-cars

Year:1923 Mileage:500
Location:

Dallas, Texas, United States

Dallas, Texas, United States
Advertising:
Vehicle Title:Clear
For Sale By:Private Seller
Engine:325 C.I. Dodge Hemi
Condition:

Used

Year
: 1923
Drive Type: Torque Flight 727 transmission w/ Lokar shifter
Make: Ford
Mileage: 500
Model: Model T
Trim: Base

1923 T Bucket for Sale: 325 C.I. Dodge Hemi power, two new Edelbrock 4 barrel carbs on Offenhauser manifold w/ a shotgun air cleaner, American Racing wheels,  Autometer gauges, painless wiring, Lokar cable & pedals, Mallory electronic distributer, electric fan, new custom headers, new dash & interior, 29 x 15.5 Mickey Thompson Sportsman rear tires, new front end w/ disc brakes, Beer Keg gas tank, Torque Flight 727 transmission w/ Lokar shifter, MSD ignition box, IDIT Tilt & Telescoping steering column; many extras.  All mods listed less than 150 miles on them.  Many class wins.  Local pick up only.

Auto Services in Texas

Whatley Motors ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 409 Scott Ave, Sheppard-Afb
Phone: (940) 723-8991

Westside Chevrolet ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 23001 Katy Fwy, Barker
Phone: (281) 392-3200

Westpark Auto ★★★★★

Auto Repair & Service
Address: 4045 Tanglewilde St, West-University-Place
Phone: (281) 320-1185

WE BUY CARS ★★★★★

Used Car Dealers, Financial Services, Loans
Address: 2306 E Berry St, Aledo
Phone: (817) 535-1111

Waco Hyundai ★★★★★

New Car Dealers, Used Car Dealers
Address: 1501 W Loop 340, Bruceville
Phone: (254) 420-2366

Victorymotorcars ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 5829 Beverly Hill St, Missouri-City
Phone: (713) 783-6555

Auto blog

3dCarbon now offering body kit for Ford Fusion

Tue, 01 Oct 2013

A factory-backed body kit by 3dCarbon is now available to Ford Fusion owners who want their car to stand out from the crowd while not being too flashy. The body kit adds a more aggressive front spoiler, side skirts, rear body trim and spoiler that are, in fact, integrated quite nicely into the Fusion's already-comely styling, just as 3dCarbon claims. All Fusions with the kit also receive dual exhaust ports with the stainless-steel exhaust surrounds usually reserved for the Titanium package Fusion EcoBoost models.
A nice detail of 3dCarbon's injection-molded urethane body kit is that it has undergone crash testing to certify that it can withstand crashes up to five miles per hour. Because of this, the kit is warrantied by 3dCarbon for five years or 50,000 miles, much like Ford's warranty on its own parts. In fact, the kit is available through participating Ford dealers and can be financed through Ford Motor Credit. Buyers can purchase the kit - pre-painted or unpainted - and install it themselves, or it can be purchased with a new Ford Fusion and installed at the dealer, pre-painted to factory specifications. Of course, it can also be ordered directly from the source. Take a look at the press release below for more detailed information on the body kit, and let us know what you think of it in Comments.

Mopar Hellephant is sold out, but here are 4 other awesome crate V8s to try

Mon, May 6 2019

Despite a relatively enormous $30,000 price tag, Mopar's 1,000-horsepower supercharged Hellephant crate engine sold out in just 48 hours. Some enthusiasts may have missed out on the crazy engine due to lack of funds, or they just assumed there would still be some Hellephants down the line. But worry not, swap-happy gearheads. There are plenty of V8s in the world to pick from, and we highlighted four favorites. They're not as powerful, but they're all cheaper, and still have a lot to offer. Mopar 6.2L Hellcrate Odds are a lot of prospective Hellephant buyers were Mopar fans to begin with, so we'll start the list with the next-most-potent offering: the Hellcrate. This is the same supercharged 6.2-liter V8 found under the hood of the Dodge Charger and Challenger Hellcats and the Grand Cherokee Trackhawk. It makes 707 horsepower and 650 pound-feet of torque like those cars, too. It's also about $10,000 cheaper than the Hellephant engine at $20,020, and that leftover money can be used to finish the project or for aftermarket upgrades to get it closer to the Hellephant's output. GM LS9 6.2L The Hellcrate isn't the only factory supercharged crate engine on the market. From General Motors comes the supercharged 6.2-liter LS9 V8. This is the engine that was used in the C6 Corvette ZR1. At 638 horsepower and 604 pound-feet of torque, it doesn't make as much power or torque as the Hellcrate. But it does boast a dry sump oil system. So instead of pumping oil out of a pan at the bottom, the engine uses an oil tank mounted remotely that pumps oil into the engine. This means the engine is shorter overall, and can be mounted lower for a better center of gravity. It also means that there's almost no risk of running the engine dry in hard cornering, as could happen with a normal oil sump where the oil can slosh to the side without the oil pump. Basically, it offers some major benefits if you want supercharged V8 power for a road course car. It's also a tad cheaper than the Hellcrate at $18,149. But get one while you can, because GM is only selling what's left from when it was building the C6 ZR1. Ford Aluminator 5.2XS Our pick from the Blue Oval lacks a supercharger, but it's still pretty sweet.

Ford recalling 450,000 Fusion, Mercury Milan sedans

Tue, Nov 24 2015

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.