1923 Ford T Bucket on 2040-cars
Spring, Texas, United States
Up for auction is a replica of a 1923 T Bucket built in 1983 using a Glider Kit frame and a replica fiber glass body. The vehicle is in good mechanical shape but hasn't been ran since last year so it is cold natured. My lack of time for this project is your gain and all the right parts are there to have one awesome little show or track car. The motor is a Chevrolet 350 small block, the transmission is a Turbo 350, 8.8 ford rear end, with drum brakes but the car has front disk brakes to help it stop. The windshield has been sloped back approximately 15 degrees to give for a one of a kind sleek look. This little car will make an excellent project, the list of things it needs is very short, tune up, some interior freshening up, and some minor paint and body work unless you like the rat rod feel. Also since this car is over 30 years old it can be registered as an antique car in Texas just like the original T-Buckets. Payment is preferred by cash but I do have the ability to accept credit card for a small fee through my business processing system. Please let me know if you have any questions and happy bidding.
|
Ford Model T for Sale
Auto Services in Texas
World Tech Automotive ★★★★★
Western Auto ★★★★★
Victor`s Auto Sales ★★★★★
Tune`s & Tint ★★★★★
Truman Motors ★★★★★
True Image Productions ★★★★★
Auto blog
These horribly misguided front-drive design studies nearly became the Mustang
Fri, 08 Nov 2013As we eagerly await the unveiling of the all-new sixth-generation Mustang, Ford has been giving us some great information over the past few months showing what has gone into shaping its venerable pony car. As many changes as the Mustang has gone through in its 50 years, though, it appears the fourth-gen model played a decisive and pivotal role in the car's future.
As is part of Mustang lore, the front-wheel drive Ford Probe was originally developed as a next-generation Mustang in the Eighties before cooler heads prevailed. The Blue Oval has just released a handful of images showing how bad things could have been - including a full-scale clay model of a front-wheel-drive Mustang (shown above). Fortunately, the FWD Mustang plan was scrapped and Ford went to work designing a rear-wheel-drive replacement for the Fox Body Mustang, with three design studies making it far enough to become full-scale models. These include the soft "Bruce Jenner" Mustang, the over-the-top "Rambo" Mustang and the middle-ground "Arnold Schwarzenegger" Mustang, which finally became the basis for the 1994 'Stang.
By early 1991, the design language of the fourth-generation Mustang had been worked out, and the rest, they say, is history. Scroll down for the fascinating press release telling the story of the fourth-gen Mustang, and be sure to check out the gallery of horribly misguided sketches and various design studies that were all on the table in the late 1980s.
Ford Mustang EcoBoost has fake engine soundtrack
Wed, 24 Sep 2014The 2015 Ford Mustang EcoBoost represents a huge change for the Blue Oval as the first pony car in decades to be available with a four-cylinder engine. But a recent tweet (below) from Road & Track raised our curiosity about the new vehicle. Editor Jason Cammisa pulled a fuse while driving the latest 'Stang with the 2.3-liter EcoBoost engine, and he found that both the stereo and engine went quiet in the cabin. That indicated the coupe might have some form of artificial engine sound being piped in - a feature not previously heavily reported for the model. Autoblog spoke with Ford engineer Shawn Carney who confirmed that only the turbocharged four-cylinder Mustang comes with this system, called Active Noise Control.
@jasoncammisa pulls fuse 27 on 4cyl #2015mustang EcoBoost. Both stereo & engine go quiet. #FakeEngineNoise #busted! pic.twitter.com/WNzQefCbtQ
- Road & Track (@RoadandTrack) September 17, 2014
Ford and Lincoln recall roundup: Explorer, F-350 Super Duty, Aviator
Fri, Jul 16 2021Ford and Lincoln released information on a flurry of recalls this morning. There are three in total, and they span different models and separate issues. Those models include the 2013-17 Ford Explorer, 2020-21 Lincoln Aviator and 2020-21 Ford F-350 Super Duty. We’ll organize these three in order of most cars recalled. 2013-17 Ford Explorer This recall includes a substantial 774,696 vehicles, of which 676,152 are in North America. Why? Ford says these vehicles “may experience a seized cross-axis ball joint that may cause a fractured rear suspension toe link.” The diminished steering control that would follow could increase the likelihood of a crash, Ford states. Only vehicles that spent time in high corrosion states should be affected, Ford says. That means places that lay salt down, experience cold weather and high humidity. Owners of these vehicles will need to take their car into the dealership, where it will be inspected to determine if it needs work. If so, Ford will replace the cross-axis ball joint/knuckle, then replace the toe links with a newly-designed part. Notifications to owners of these vehicles are scheduled to be sent out the week of August 23. WeÂ’ll note that Ford is reporting six “allegations of injury” related to this issue. For those who donÂ’t live in the high-corrosion states/their car was never registered in those states, Ford is offering a customer satisfaction program in case you were interested in having the work done anyway. 2020-21 Lincoln Aviator Lincoln is pulling back 40,995 new Aviators due to an improperly secured battery cable wire harness. This recall applies to gasoline-only versions of the Aviator, so Grand Touring PHEV buyers neednÂ’t worry. The wire harness may contact the AC compressor pulley due to it being secured improperly. Ford says that over time, the pulley could rub through the wire harnessÂ’ insulation, resulting in a short circuit and ultimately a fire. However, Ford is not currently aware of any injuries or fires related to this concern as of now. When you bring your car in, the dealer will inspect all the parts to determine what needs to be done. Fixes range from a basic tie strap to keep the harness away from the pulley (if it hasnÂ’t made contact yet), to replacement of the wire harness and AC belt if the contact has caused damage. Owners should expect to be notified the week of July 30 if their Aviator is involved in the recall.