1920 Ford Model T Hot Rod on 2040-cars

Auto blog

2017 Ford F-150 Raptor desert testing heats up

In case there was any doubt, Ford is taking the development of the second-generation SVT Raptor very, very seriously. The Blue Oval recently completed over 1,000 miles of testing in the boiling heat of the American southwest. Apparently, that mileage was accrued over a 66-mile route designed to mimic the torturous terrain encountered by racers in the Baja 1,000 off-road race. The prototypes, which were built from a mix of existing and next-gen Raptor components, were tested with "fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches." Ford claims the new truck managed to run the circuit 25-percent faster than the current F-150 SVT Raptor, averaging 50 miles per hour while going as fast as 100 mph in stretches. That said, Dearborn didn't release any dedicated times, so it's unclear just how quickly the 66-mile stage was completed. We do know that durability was a big part of the testing. Ford claims each lap was completed by what sounds like a pretty significant jump, with the trucks ascending a steep ramp onto a two-foot plateau and then completing a step-down to level ground. We have to take Ford at its word here, though. "Steep" can mean any number of things, and we've no idea just how fast the trucks were hitting the ramp or how much air they got. Hopefully, the jumps were aggressive enough to prevent future frame issues. Still, Ford boasting about how rough the Raptor's testing is can be taken as a positive sign for fans of the next-generation of SVT's rugged pickup. NEW F-150 RAPTOR WRAPS UP INITIAL DESERT DURABILITY TESTING DEARBORN, Mich., July 7, 2015 – The 2017 F-150 Raptor – Ford's toughest, smartest, most capable off-road truck ever – recently completed more than 1,000 miles of testing in the southwestern United States. Over 1,028 miles of desert trail designed to parallel the Baja race course in Mexico, the 66-mile route featured a wide range of surfaces including fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches. The truck topped speeds of 100 mph in places, slowing to 10 mph in others, for an average speed of approximately 50 mph. The 2017 Raptor is 25 percent faster than the current truck based on lap times. At the end of each lap, the new Raptor completed a tabletop jump consisting of a steep ramp up to a two-foot plateau, then a step-off back to level ground.

2014 Roush Stage 3 Mustang

Up until now, it's been some years since I managed to get behind the wheel of the hot Mustangs tuned by the folks at Roush Performance. My memories of those vehicles are fond, as the Roush up-fits usually make for better-driving examples of the iconic Ford pony, with better-tuned suspensions, excellent short-shift kits and, of course, huge additions of power. The wake-your-neighbors aural characteristics of these cars have been nothing short of outstanding, too.
But in the years since my last experience with the Roush formula, Ford's own development team has churned out some pretty potent 'Stangs. We currently live in a world where the Blue Oval will sell you a Mustang with 662 horsepower from the factory, and the recently departed Boss 302 remains one of the best Mustangs - and best sports coupes - the Autoblog crew has ever driven.
So with great-driving and hugely powerful Mustangs coming straight off the line at Ford's Flat Rock Assembly Plant, does the Roush package still offer that extra special something to make it stand out? I spent a week with a Stage 3 coupe to find out.

Project Ugly Horse: Part VII

Devils, Details and Weight Reduction
There are many things I could call this exercise. A party is not one of them.
I've spent three days crammed in the axle well of this 1989 Mustang with nothing to keep me company beyond a trouble light, a DeWalt drill on the very last of its legs and billion razor sharp, red hot slivers of metal with an affinity for my most sensitive of regions. My joints are raw from crawling around on the concrete. I'm half deaf from the shriek of the spot weld cutter and the boom of the cold chisel and hammer.