Rare Early Model "ar" With Left Mounted Handbrake Looks & Runs Fantastic 40 Pix on 2040-cars

Auto blog

Toyo Tires will bring another wild catalog of rides to SEMA

Toyo Tires carts all kinds of toys to SEMA every year, the rubber company planning another 30 or so automotive exhibits this year in two locations. One of them, the Baja 911, comes with a pedigree not usually associated with the bewildering wares hawked at the Las Vegas show. TJ Russell was once lead fabricator for Singer Vehicle Design, now he's the head of Russell Built Fabrication in Sun Valley, CA. Sticking with the marque he knows well, Russell started with a 1991 Porsche Carrera 4 cabriolet, fitted the interior with a full roll cage, then built a hardtop around it to design a desert runner channeling the old Rothmans safari 911s. Underneath that bodywork lives a box-plate trailing arm suspension with 12 inches of travel, working 15-inch Fifteen52 FIA-approved Gravel wheels and 30-inch Toyo Open Country A/T II tires. Power comes from a purpose-built 3.8-liter air-cooled flat-six with about 350 horsepower — 100 hp more than stock — in a car that weighs 400 pounds less than the original. Oh, and as documented on Instagram with the tagline "All race outside, all business inside," the interior's full of quilted, cross-stitched leather, and Toyo says Russell's going to do a low-volume run of the Baja 911 starting early next year. ruffian-ford-mustang-sema-01 View 10 Photos Chris Ashton built a 1970 Ford Mustang Fastback called the Ruffian Mustang, inspired by the Trans Am Racing Series. The exterior changes are more subtle than one might think – the chin spoiler, hood scoop, and side mirrors are barely exaggerated versions of those on the original car, the intake vents astride the front lights and the steel bumpers teleported from 1970. Changes outside include de-chromed and flush-mounted glass, vented hood, front fenders that are dropped an inch, rear fender vents, dual side-exit pipes, and gargantuan fender flares over staggered Signature One wheels and Toyo Proxes 888 tires. The interior's fitted with a roll cage and race car workings. In spite of the Boss 427 badging, the engine's a 625-hp Chevrolet LS3 V8. button-built-ferrari-355-sema-01 View 13 Photos The Button Built Ferrari BB355TT picks up from last year's stanced BB328GTS widebody that gave many Internet denizens heart attacks. Laid up on a 1999 355 Berlinetta, the BB version appends a widebody kit designed Mitchell Button, rendered by Khyzyl Saleem and drenched in Azzuro la Plata, a color from Ferrari's Scagliette palette first used on a 1967 275GTB Le Mans racer.

2015 Ford F-150 pricing announced, aluminum-bodied truck up just $395

The eagerly anticipated Ford F-150 has had its 2015 pricing announced, adding only a small amount to the pickup's total cost, despite its weight-saving aluminum body. The XL and XLT entry level models only see a $395 boost over the heavier, current-generation, 2014 truck.
The XL starts at $26,615 while the XLT rings up at $31,890. The increase for Lariat is up a similarly negligible $895, to $39,880. Going up the ladder, meanwhile, the leather-intensive King Ranch sees the biggest jump of the F-150 family, with prices increasing $3,515, to $49,460. Finally, picking up the top-end Platinum trim will cost an extra $3,055, with prices starting at $52,155.
The higher prices are being blamed not only on the aluminum bodies, which trim up to 700 pounds of body fat, but on increased levels of standard equipment. While we were expecting a price hike, the fact that the 2015 F-150's volume trims - Ford spokesman Mike Levine told Reuters that the XL and XLT alone cover 70 percent of F-150 sales - have had less than a $400 increase is hugely impressive.

Company veterans promoted to set a course for the future of Ford

Ford on Wednesday named two company veterans to lead its auto and mobility businesses as the No. 2 U.S. automaker shifts its focus to autonomous vehicles and realigns its automobile portfolio. Joe Hinrichs was named president of Ford's automotive unit, and Jim Farley will be president, new businesses, technology and strategy, effective May 1. Both will report to Chief Executive Officer Jim Hackett. Hinrichs' goal will be a sustainable EBIT margin (earnings before interest and taxes) of at least 8 percent, Ford said. He'll have responsibility for all of Ford's global business units, and both the Ford and Lincoln brands. And he'll lead all of the automotive skills teams, from product development through customer experience. "Joe Hinrichs possesses the knowledge, experience and leadership to now take our Automotive business to world-class levels of product excellence, customer satisfaction, efficiency and financial performance," Hackett said. "As we enter a busy period for new product launches and further restructuring in underperforming markets, Joe's leadership in transforming businesses through focused execution will be key." Farley is charged with leading Ford's strategic transformation, in which it hopes to gain higher margins through smart/connected vehicles. He'll oversee corporate strategy, global data analytics, global partnerships, research and advanced engineering, including initiatives in smart mobility and autonomous vehicles. "Jim Farley's job is to drive us into the future, both strategically and operationally, from AVs to mobility experiences to leveraging AI and big data. Jim combines an innate feel for what customers want and need in vehicles and the ability to translate this into the vehicles and services of the future," Hackett said. Marcy Klevorn, president of Ford Mobility, plans to retire Oct. 1 after 36 years at Ford. Until then, she will report to Hackett in a strategic role. "I have asked Marcy to work with me and the senior team to accelerate our transformation," Hackett said. "Marcy's decades of experience working with many of the leading companies in the tech space as well as the work she has done with the transformation of Ford IT and the establishment of Ford Mobility gives her unique knowledge to drive these initiatives."