Model A on 2040-cars

Auto blog

Ford recalling 65k Fusions from 2014 and 2015 because key can be removed

Ford is recalling an estimated 64,869 examples of the 2014-2015 Fusion, Fusion Energi and Fusion Hybrid in North America because the key can be removed when the vehicle isn't in Park under certain conditions. Specifically, the campaign covers 56,479 units in the US, 6,048 in Canada and 2,342 in Mexico, according to the automaker's tally on November 11.
Ford says a programming problem in the instrument cluster means that the key can be removed 30 minutes after the ignition is turned off, even if the transmission is not in Park. The situation where this could happen seems quite limited, and the company is not aware of any accidents or injuries related to the issue. However, the fault puts the vehicle out of compliance with federal regulations covering theft protection and rollaways, and must be repaired.
The fix is easy: Ford will reprogram the instrument cluster at no cost to consumers. According to Ford spokesperson Kelli Felker in an email to Autoblog, "We will notify customers the week of January 5th." Scroll down to read Ford's announcement.

How Ford switched gears for the all-new F-150

Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.

GM being sued over imploding Bosch fuel pumps in Duramax diesel trucks

Texas-based law firm Hilliard Martinez Gonzalez (HMG) this week filed a class-action lawsuit against General Motors over an alleged issue with Bosch CP4 fuel pumps. The suit claims Bosch designed the CP4 pump to work with European diesel fuel, which is thicker than U.S. diesel. When GM installed that pump in the 6.6-liter Duramax engine used from the 2011 to 2016 model years, the lawsuit claims the thinner U.S. fuel didn't provide enough lubrication, allowing air pockets to form in the fuel pump. That, in turn, allegedly let metal rub against metal inside the pump, causing the pump to eventually disintegrate and "send thousands of metal shards into the fuel injection system and every part of the engine." The Detroit News reported on the most recent lawsuit filed in Michigan's Eastern District Court, but the case is another piece of nationwide legal maneuvering going on since at least last September. Every U.S. truck maker used the Bosch CP4 fuel pump, and HMG originally went after all of them, as well as Bosch. On September 30, 2018, HMG filed a class-action suit in Texas on behalf of eight plaintiffs. The law firm wanted to prosecute the affair under RICO — the Racketeer Influenced and Corrupt Organizations Act — and named 10 defendants: FCA US LLC, FCA North America Holdings, LLC, F/K/A Chrysler Group, Fiat Chrysler Automobiles, N.V., Ford Motor Company, General Motors LLC, Robert Bosch GmbH, Robert Bosch LLC, VM North America, Inc., and VM Motori S.P.A.  The firm filed another suit in Florida on Nov. 2, 2018, against the same 10 defendants, again under the RICO statute, this time on behalf of more than 30 plaintiffs. We don't know how many other suits might have been filed, but the two suits mentioned apparently didn't have legs — the courts dismissed both quickly. So HMG shifted its strategy away from the RICO angle, and focused its efforts on GM, filing suit in California on Nov. 20, 2018. Instead of trying to catch 10 fish with a small net, HMG wants to score one fish with a big net. The results have borne more promise for the plaintiffs. In July this year, a judge in California denied GM's motion to dismiss, noting "the alleged defect is central to the vehicleÂ’s function." This latest suit filed on Aug. 6 in Detroit singles out GM again.  The Bosch CP4 is known to be problematic, however.