Best In U.s Must See 1936 Ford Model A Tudor Hot Rod Auto Cold A/c Leather Sweet on 2040-cars

Auto blog

Automakers' rush on aluminum may result in shortage

Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.

Your official Ford Transit specs are here, $29,565* to start

Ford has released the full list of pricing and specs on its new Transit, the replacement for the long-lived E-Series cargo van. Prices are set to start at $29,565 and can increase rapidly from there, depending on length, engine and wheelbase, among other options.
Let's talk first about those new engines. The base is the familiar 3.7-liter, naturally aspirated V6. It boasts 275 horsepower and 260 pound-feet of torque and can return up to 14 miles per gallon in the city and 19 mpg on the highway. This engine can also be adapted to run on LPG or compressed natural gas. Of course, there are better alternatives, for a price, the first of which is Ford's well-received, 3.5-liter EcoBoost V6. It packs 310 hp and a best-in-class 400 lb-ft of torque (available at just 2,500 rpm) while matching the naturally aspirated engine in both city and highway fuel economy.
Then, there's the diesel. With a 3.2-liter, five-cylinder diesel mill at its disposal, the Transit generates 350 lb-ft between 1,500 and 2,500 rpm, along with 185 hp. This engine hasn't been rated by the EPA, although we'd be really, really surprised if it didn't handily best either of the gas-powered engines in fuel efficiency. A six-speed automatic is standard, regardless of engine.

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video: